Summary for Test 2025-09-08-14-2
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 1001063 DEA: 033G3804 EFIS: 0324000122 |
|---|---|
| DIST-CO-RTE-PM | 03-BUT-32-R23.9/30.8,31.0/31.6 |
| Award Date | 05/27/2025 |
| Closeout Date | 08/26/2026 |
| Work Description | HMA OVERLAY, COLD PLANE, AND REMOVE & REPLACE PVMT DELINEATION. |
| Location Description | BUTTE COUNTY NEAR CHICO FROM NOPEL AVENUE TO 1.3 MILES WEST OF CARPENTER RIDGE ROAD AND FROM 1.1 MILES WEST OF CARPENTER RIDGE ROAD TO 0.5 MILE WEST OF CARPENTER RIDGE ROAD |
| QA Service Level | 1 (Verified on 03/19/2025) |
Sample Information
| Sample Taken Date | 09/08/2025 | Sample Unique Key | 14 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 09/08/2025 | Sample type | Quality Assurance |
| A brief description of the sample | 1/2" HMA w/ 25% RAP | The quantity of what the sample constitutes | 2 Boxes |
| From where was the sample collected | Source | First name of sampler or witnessed by | Brad |
| Last name of sampler or witnessed by | McKeehan | Title of sampler | TET |
| Telephone number of sampler | Laboratory sample identification | Daily 25-168 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Teichert Hallwood | |
| Transportation Laboratory (TL) Number | C955789 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 10 | HMA Mix Number | 30940142416V |
| Binder content (%) | 5.2 | Virgin binder PG | PG 58-22 |
| Design binder PG | PG 64-16 | Binder Supplier | Valero |
| RAP content (%) | 25 | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-09-08-14
DIME Test ID: 2025-09-08-14-2
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-09-09
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Joshua Wilson
Date of test: 09/08/2025
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 1696.6 g
Mass Loss: 101.6 g
Correction Factor (Percent by mass of HMA Specimen): 0.92 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.02 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.07 %
General comments (publicly viewable) (Max 1000 characters): L1
OBC 5.2%
Test was verified on 9/9/2025 ✔