Summary for Test 2025-02-26-15-7
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 1000681 DEA: 081J7204 EFIS: 0818000099 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-S0.0/S0.8,0.0/R15.0 |
| Award Date | 01/17/2025 |
| Closeout Date | Not set |
| Work Description | REPLACE AC SURFACING, COLD PLANE AC PAVEMENT, HMA, RSP, AND MGS. |
| Location Description | SAN BERNARDINO COUNTY IN AND NEAR BARSTOW FROM 0.1 MILE WEST OF ROBERTA STREET TO MONTARA ROAD AND FROM ROUTE 15 TO 0.4 MILE EAST OF LAVA WASH BRIDGE |
| QA Service Level | 1 (Verified on 01/13/2025) |
Sample Information
| Sample Taken Date | 02/26/2025 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/28/2025 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R25 LSM 1.0% |
| The quantity of what the sample constitutes | 3 bags comb LT Agg, 3 bags of each bin size virgin agg, 2 bags of RAP | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Alex | Last name of sampler or witnessed by | Samano |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0143A-25 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | LHoist North America/ Wor/ Agcon/ Calport/ Blue Diamond | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Calportland Scheerer Quarry |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Victorville Plant | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 300154 R25 LSM PG64-16 | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-02-26-15
DIME Test ID: 2025-02-26-15-7
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2026-01-30
Test Results
Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 03/08/2025
Mass of saturated surface dry sample (before pycnometer) (S): 500.0 grams
Mass of the pycnometer with water and aggregate (C): 959.8 grams
Mass of the pycnometer with water (B): 649.1 grams
Mass of the oven dried sample (before pycnometer) (A): 492.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500.0 grams
Mass of the oven dry aggregate (for absorption) (A): 492.9 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.604
Bulk specific gravity (SSD Basis): 2.641
Apparent specific gravity: 2.705
Absorption: 1.4 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/30/2026 ✔