Summary for Test 2025-08-08-3-1
Test performed: AASHTO T209-22Project Information
| Project Identifiers | Project ID: 1000943 DEA: 09404304 EFIS: 0924000070 |
|---|---|
| DIST-CO-RTE-PM | 09-MNO-120-32.1/R35.0,48.0/50.0 |
| Award Date | 04/28/2025 |
| Closeout Date | 12/29/2025 |
| Work Description | COLD IN-PLACE RECYCLE EXISTING PAVEMENT AND PLACE HMA. |
| Location Description | MONO COUNTY NEAR BENTON FROM 0.5 MILE EAST TO 3.4 MILES EAST OF BAXTER\\\\'S ROAD AND FROM 2.0 MILES WEST OF BLACK LAKE ROAD TO BLACK LAKE ROAD |
| QA Service Level | 1 (Verified on 04/07/2025) |
Sample Information
| Sample Taken Date | 08/08/2025 | Sample Unique Key | 3 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/08/2025 | Sample type | Acceptance |
| A brief description of the sample | 1/2" HMA 58-34M R25 | The quantity of what the sample constitutes | 12 Boxes of HMA |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Jeff |
| Last name of sampler or witnessed by | Puente | Title of sampler | QA |
| Telephone number of sampler | Laboratory sample identification | HMA-14 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Granite Lee Vining | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | 1 |
| Sublot number | 14 | HMA Mix Number | |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-08-08-3
DIME Test ID: 2025-08-08-3-1
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2025-08-22
Test Results
Number of Samples: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 08/18/2025
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water 1: 7310.5 grams
Mass of oven-dry sample in air for Sample 1: 1673.8 grams
Mass of container filled with the sample and water for Sample 1: 8308.0 grams
Temperature of Water: 76.8 °F
Specific Gravity for Sample 1: 2.475
Theoretical maximum density at 25°C (77°F): 154.1 lb/ft^3
General comments (publicly viewable) (Max 1000 characters): HMA-14
Test was verified on 8/22/2025 ✔