Summary for Test 2025-08-13-22-1
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 1001111 DEA: 010M6504 EFIS: 0123000052 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-101-125.7/R131.7 |
| Award Date | 06/09/2025 |
| Closeout Date | 11/03/2025 |
| Work Description | REPLACE AC SURFACING AND DELINEATION. |
| Location Description | HUMBOLDT COUNTY ON ROUTE 101 FROM 0.40 MILE SOUTH OF SOUTH PRAIRIE CREEK UNDERCROSSING TO 2.76 MILES NORTH OF BOYES CREEK VIADUCT |
| QA Service Level | 1 (Verified on 05/05/2025) |
Sample Information
| Sample Taken Date | 08/13/2025 | Sample Unique Key | 22 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 08/13/2025 | Sample type | Quality Assurance |
| A brief description of the sample | sample at 1250 tons | The quantity of what the sample constitutes | 4 Boxes HMA |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Jason |
| Last name of sampler or witnessed by | Huett | Title of sampler | TET |
| Telephone number of sampler | 7078155590 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Kernen Blue Lake Plant | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | 5.1 | Virgin binder PG | PG 64-16 |
| Design binder PG | PG 64-16 | Binder Supplier | |
| RAP content (%) | 15 | WMA Additives | Yes |
| Antistrip type | Evotherm |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-08-13-22
DIME Test ID: 2025-08-13-22-1
Testing Lab: CT D01 - Crescent City Field Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2025-08-21
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: jason huett
Date of test: 08/21/2025
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1760.7 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 129.0 grams | 93 % | |||||
| 288.9 grams | 84 % | |||||
| 783.0 grams | 56 % | |||||
| 1128.8 grams | 36 % | |||||
| 1317.5 grams | 25 % | |||||
| 1438.4 grams | 18 % | |||||
| 1533.3 grams | 13 % | |||||
| 1603.6 grams | 9 % | |||||
| 1648.9 grams | 6.3 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/21/2025 ✔