Summary for Test 2017-11-10-2-2
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 211513 DEA: 120M4904 EFIS: 1212000090 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-5-1.2/2.2 |
| Award Date | 09/20/2016 |
| Closeout Date | 01/09/2020 |
| Work Description | WIDEN FWY AND BRIDGE AND CONSTRUCT RW, SOUND WALL, AND CONC BARRIERS. |
| Location Description | ORANGE COUNTY IN SAN CLEMENTE FROM 0.1 MILE NORTH OF AVENIDA MENDOCINO OVERCROSSING TO 0.2 MILE SOUTH OF AVENIDA PRESIDIO UNDERCROSSING |
| QA Service Level | 1 (Verified on 11/03/2016) |
Sample Information
| Sample Taken Date | 11/10/2017 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/15/2017 |
| Sample type | Quality Assurance | A brief description of the sample | 3/4 in A307 Galvanized Anchor Rod |
| The quantity of what the sample constitutes | 300 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Russell | Last name of sampler or witnessed by | Lynch |
| Title of sampler | QAI | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Ulmer Industries | Transportation Laboratory (TL) Number | C939725 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L96-210-17 | Structure unique identifier | Not set |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 278417 | Nut Mfg. Lot Number(s) | |
| Washer Mfg. Lot Number(s) | Bolt Specification | F1554 | |
| Bolt Length(s) | 3' | Nut Specification | N/A |
| Washer Specification | N/A | Finish | HDG |
| Diameter/Size | 3/4 | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-11-10-2
DIME Test ID: 2017-11-10-2-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2017-11-23
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Fred
Date of test: 11/15/2017
UTM: 400KIP
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1B | A307 A .75 x 44\" Stud Rod | 0.334 | 24297 | 108 | 72746 | 51836 | 17313 | A307 A Stud Rod |
General comments (publicly viewable) (Max 1000 characters): A307 A Stud Rod
Test Graph
Source: Partner Data Point FileTest was verified on 11/16/2017 ✔