Summary for Test 2025-07-16-97-5
Test performed: CTM 212-May 2010Project Information
| Project Identifiers | Project ID: 1000958 DEA: 021K0704 EFIS: 0224000048 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-139-11.0/16.0 |
| Award Date | 04/09/2025 |
| Closeout Date | Not set |
| Work Description | PERFORM PARTIAL DEPTH RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A). |
| Location Description | LASSEN COUNTY ABOUT 9 MILES NORTH OF SUSANVILLE FROM 1.2 MILES SOUTH OF HAGATA ROAD TO 0.9 MILE SOUTH OF MEADOW CHANNEL BRIDGE |
| QA Service Level | 1 (Verified on 03/21/2025) |
Sample Information
| Sample Taken Date | 07/16/2025 | Sample Unique Key | 97 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/28/2025 |
| Sample type | Acceptance | A brief description of the sample | Shoulder backing |
| The quantity of what the sample constitutes | 3 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Joe | Last name of sampler or witnessed by | Delgado |
| Title of sampler | Consultant | Telephone number of sampler | |
| Laboratory sample identification | D79977 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Shaw Pit - Lookout, CA | Transportation Laboratory (TL) Number | 875603 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Undefined |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Sample Pad (Stockpile) | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-07-16-97
DIME Test ID: 2025-07-16-97-5
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2025-08-11
Test Results
Input Type: Measured
Tester's full name: Sean McWithey
Date of test: 08/01/2025
Which procedure was used to fill the measure with aggregate?: no data
Weight of water in the measure: 21.06 lbm
Water temperature: 73 deg F
Tare weight of empty measure: 12.973 lbm
Weight of measure filled with aggregate (test 1): 49.759 lbm
Weight of measure filled with aggregate (test 2): 49.908 lbm
Weight of measure filled with aggregate (test 3): 49.592 lbm
Water density: 62.28 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 36.79 lbm
Net weight of aggregate in measure (test 2): 36.94 lbm
Net weight of aggregate in measure (test 3): 36.62 lbm
Average net weight of aggregate required to fill the measure: 36.78 lbm
Aggregate unit weight: 108.76 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters): Unit W.=108.8
Test was verified on 8/11/2025 ✔