Summary for Test 2025-07-16-97-6

Test performed: CTM 205-December 2010

Project Information

Project IdentifiersProject ID: 1000958
DEA: 021K0704
EFIS: 0224000048
DIST-CO-RTE-PM02-LAS-139-11.0/16.0
Award Date04/09/2025
Closeout DateNot set
Work DescriptionPERFORM PARTIAL DEPTH RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A).
Location DescriptionLASSEN COUNTY ABOUT 9 MILES NORTH OF SUSANVILLE FROM 1.2 MILES SOUTH OF HAGATA ROAD TO 0.9 MILE SOUTH OF MEADOW CHANNEL BRIDGE
QA Service Level1 (Verified on 03/21/2025)

Sample Information

Sample Taken Date07/16/2025 Sample Unique Key97
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/28/2025
Sample typeAcceptance A brief description of the sampleShoulder backing
The quantity of what the sample constitutes3 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byJoe Last name of sampler or witnessed byDelgado
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD79977 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek Construction and Materials - Shaw Pit - Lookout, CA Transportation Laboratory (TL) Number875603
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Undefined
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedSample Pad (Stockpile)
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Test Details

DIME Sample ID: 2025-07-16-97
DIME Test ID: 2025-07-16-97-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 205-December 2010: Method of Test for Determining Percentage of Crushed Particles
Test Release Date: 2025-08-11

Test Results


Will you be using 1/4 in. x No. 4 sieve?: Yes
Input Type: Measured
Tester's full name: Dacota Mei
Date of test: 08/04/2025
Mass of Sample Tested 2 in. × 1 ½ in.: 0 grams
Mass of Crushed Particles Tested 2 in. x 1 ½ in.: 0 grams
Mass of Sample Tested 1 ½ in. x 1 in.: 1515.8 grams
Mass of Crushed Particles Tested 1 ½ in. x 1 in.: 1515.8 grams
Mass of Sample Tested 1 in. x ¾ in.: 1011 grams
Mass of Crushed Particles Tested 1 in. x ¾ in.: 1011 grams
Mass of Sample Tested 3/4 in. x 1/2 in.: 708.1 grams
Mass of Crushed Particles Tested 3/4 in. x 1/2 in.: 708.1 grams
Mass of Sample Tested 1/2 in. x 3/8 in.: 404 grams
Mass of Crushed Particles Tested 1/2 in. x 3/8 in.: 402.2 grams
Mass of Sample Tested 3/8 in. x 1/4 in.: 100.4 grams
Mass of Crushed Particles Tested 3/8 in. x 1/4 in.: 99.2 grams
Mass of Sample Tested 1/4 in. x No.4: 101.8 grams
Mass of Crushed Particles Tested 1/4 in. x No. 4: 101.8 grams
Mass of Sample Tested No. 4 x No. 8: 25.5 grams
Mass of Crushed Particles Tested No.4 x No. 8: 25.5 grams
Mass Retained on Sieve 2 in. x 1 1/2 in.: 0 grams
Mass Retained on Sieve 1 1/2 in. x 1 in.: 1188 grams
Mass Retained on Sieve 1 in. x 3/4 in.: 2200 grams
Mass Retained on Sieve 3/4 in. x 1/2 in.: 3557 grams
Mass Retained on Sieve 1/2 in. x 3/8 in.: 4335 grams
Mass Retained on Sieve 3/8 in. x 1/4 in.: 5296 grams
Mass Retained on Sieve 1/4 in. x No.4: 6210 grams
Mass Retained on Sieve No. 4 x No. 8: 133.2 grams
Total Mass of Aggregate Sieved: 15009 grams
Percent Retained 2 in. x 1 1/2 in.: 0 %
Percent Retained 1 1/2 in. x 1 in.: 8 %
Percent Retained 1 in. x 3/4 in.: 15 %
Percent Retained 3/4 in. x 1/2 in.: 24 %
Percent Retained 1/2 in. x 3/8 in.: 29 %
Percent Retained 3/8 in. x 1/4 in.: 35 %
Percent Retained 1/4 in. x No. 4: 41 %
Percent Retained No. 4 x No. 8: 1 %
Percent Crushed 2 in. x 1 1/2 in.: 0 %
Percent Crushed 1 1/2 in. x 1 in.: 100 %
Percent Crushed 1 in. x 3/4 in.: 100 %
Percent Crushed 3/4 in. x 1/2 in.: 100 %
Percent Crushed 1/2 in. x 3/8 in.: 99.55 %
Percent Crushed 3/8 in. x 1/4 in.: 98.8 %
Percent Crushed 1/4 in. x No. 4: 100 %
Percent Crushed No. 4 x No. 8: 100 %
Percent Coarse Crushed: 100 %
Percent Fine Crushed: 100 %
General comments (publicly viewable) (Max 1000 characters): 2F=100%

Test was verified on 8/11/2025