DIME - Test Summary

DIME » All Projects » Project DEA: 060Y1304 » Sample 2025-08-04-25 » View Test Details

Summary for Test 2025-08-04-25-1

Test performed: CTM 202-November 2011

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only. Please click this link to view the corrected test.

Project Information

Project Identifiers	Project ID: 995242 DEA: 060Y1304 EFIS: 0619000010
DIST-CO-RTE-PM	06-KER-33-40.4/59.3
Award Date	06/20/2024
Closeout Date	Not set
Work Description	COLD PLANE, PLACE HMA AND RHMA-G, AND REPLACE CULVERTS.
Location Description	KERN COUNTY ABOUT 8 MILES NORTH OF MCKITTRICK FROM CYMRIC WASH BRIDGE TO 0.8 MILE SOUTH OF ROUTE 46
QA Service Level	1 (Verified on 09/03/2024)

Sample Information

Sample Taken Date	08/04/2025	Sample Unique Key	25
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/05/2025
Sample type	Acceptance	A brief description of the sample	Class 2 AB Recyled
The quantity of what the sample constitutes	1 bags class 2 AB	From where was the sample collected	Job Site
First name of sampler or witnessed by	Amber	Last name of sampler or witnessed by	McCracken
Title of sampler	Inspector	Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite On Site Crushing Plant	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	Recycled class 2 AB James Rd
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Windrow in the field.
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

Test Details

DIME Sample ID: 2025-08-04-25

DIME Test ID: 2025-08-04-25-1

Testing Lab: CT D06 - Bakersfield Field Laboratory

Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates

Test Release Date: 2025-08-05

Test Results

What size aggregate is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

For Combined Gradation only, has the fine aggregate sample been reduced?: Yes

For Combined Gradation only, use #40 Sieve?: No

Input Type: Measured

Tester's full name: Neale Brown

Date of test: 08/04/2025

Sieve Size	Cumulative Mass Retained	Cumulative Percent Passing
Total mass of material in the sample	10270 grams
3 in. sieve	0.0 grams	100 %
2 1/2 in. sieve	0.0 grams	100 %
2 in. sieve	0.0 grams	100 %
1 1/2 in. sieve	0.0 grams	100 %
1 in. sieve	0.0 grams	100 %
3/4 in. sieve	241.0 grams	98 %
1/2 in. sieve	1174.5 grams	89 %
3/8 in. sieve	1990.0 grams	81 %
#4 sieve	4006.5 grams	61 %
Fine Sample Mass (reduced)	483.5 grams
#8 sieve	130.7 grams	45 %
#16 sieve	223.7 grams	33 %
#30 sieve	301.9 grams	23 %
#50 sieve	366.8 grams	15 %
#100 sieve	412.6 grams	9 %
#200 sieve	439.1 grams	5.6 %

General comments (publicly viewable) (Max 1000 characters):

Test File Attachments

File Name	Extension	File Size	Date Uploaded	Test ID	Actions
06-0Y1304_37042_250804_22to25	pdf	194.93 KB	08/05/2025	2025-08-04-25-1	Info

Test was verified on 8/5/2025 ✔

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.