Summary for Test 2025-07-21-29-1
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 1000225 DEA: 023J3204 EFIS: 0222000034 |
|---|---|
| DIST-CO-RTE-PM | 02-TRI-3,36,299-Var |
| Award Date | 06/06/2024 |
| Closeout Date | Not set |
| Work Description | BRIDGE POLYESTER CONCRETE OVERLAY & METHACRYLATE DECK SEAL. |
| Location Description | TRINITY COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 04/08/2024) |
Sample Information
| Sample Taken Date | 07/21/2025 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/22/2025 |
| Sample type | Acceptance | A brief description of the sample | 1 Bag RAP |
| The quantity of what the sample constitutes | Production Start Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | J. | Last name of sampler or witnessed by | Battles |
| Title of sampler | PEI | Telephone number of sampler | |
| Laboratory sample identification | D79966B | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Tullis Inc. - Northstate Asphalt (Redding CA) | Transportation Laboratory (TL) Number | 824078 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Tullis, Northstate Asphalt |
|---|---|---|---|
| Aggregate Size | Aggregate Source | ||
| RAP Stockpile | Stockpile Size (tons) | ||
| Reclaimed Asphalt Pavement Mix Number |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2025-07-28: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP | 2 | 2025-07-21-29-1 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-07-21-29
DIME Test ID: 2025-07-21-29-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2025-07-29
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: Yes
Input Type: Measured
Tester's full name: Sean McWithey
Date of test: 07/25/2025
| Cumulative Mass Retained | Correction Factor | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 1647.7 grams | ||||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 0.0 grams | 0.0 % | 100 % | ||||
| 29.5 grams | 0.0 % | 98 % | ||||
| 267.0 grams | -0.1 % | 84 % | ||||
| 418.5 grams | -1.0 % | 74 % | ||||
| 794.2 grams | -1.0 % | 51 % | ||||
| 1036.1 grams | -0.9 % | 36 % | ||||
| 1212.1 grams | -0.8 % | 26 % | ||||
| 1329.3 grams | -1.2 % | 18 % | ||||
| 1411.0 grams | -0.8 % | 14 % | ||||
| 1467.3 grams | -0.7 % | 10 % | ||||
| 1506.8 grams | -0.6 % | 8.0 % | ||||
| 1507.6 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/29/2025 ✔