Summary for Test 2025-05-29-66-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 214469 DEA: 030H08U4 EFIS: 0319000029 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-50-L0.2/R6.1 |
| Award Date | 06/30/2020 |
| Closeout Date | Not set |
| Work Description | Sac 50 Design Build PLEASE NOTE THAT DESIGN BUILDER MUST PERFORM QUALITY VALIDATION TESTING IN ACCORDANCE WITH THE MATERIAL CONTROL SCHEDULE (MCS) FOR ITEMS SUCH AS STRANDS, HS BOLTS, ELASTOMERIC BEARING PADS, JOINT SEALANTS, COUPLERS & WELDED HOOPS, ETC |
| Location Description | FROM 0.1 MILE EAST OF I-5 TO 0.8 MILE EAST OF WATT AVE |
| QA Service Level | 1 (Verified on 10/23/2019) |
Sample Information
| Sample Taken Date | 05/29/2025 | Sample Unique Key | 66 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/02/2025 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 34 Totes | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000163KBP | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ5E00619T |
|---|---|---|---|
| Batch number | AZ5E00619T | Mix number | AZ5E00619T |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-05-29-66
DIME Test ID: 2025-05-29-66-3
Testing Lab: Future Labs, LLC
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2025-07-25
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Alex Hamilton
Date of test: 07/11/2025
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.505 in
Sample 1 Thickness: 0.245 in
Sample 1 Area: 0.1237 in^2
Sample 1 Ultimate Strength Actual: 335 lbs
Sample 1 percent elongation: 56 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.528 in
Sample 2 Thickness: 0.253 in
Sample 2 Area: 0.1336 in^2
Sample 2 Ultimate Strength Actual: 373 lbs
Sample 2 percent elongation: 59 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.511 in
Sample 3 Thickness: 0.23 in
Sample 3 Area: 0.1175 in^2
Sample 3 Ultimate Strength Actual: 311 lbs
Sample 3 percent elongation: 50 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.512 in
Sample 4 Thickness: 0.248 in
Sample 4 Area: 0.127 in^2
Sample 4 Ultimate Strength Actual: 349 lbs
Sample 4 percent elongation: 53 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.512 in
Sample 5 Thickness: 0.235 in
Sample 5 Area: 0.1203 in^2
Sample 5 Ultimate Strength Actual: 350 lbs
Sample 5 percent elongation: 61 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.505 in
Sample 6 Thickness: 0.228 in
Sample 6 Area: 0.1151 in^2
Sample 6 Ultimate Strength Actual: 299 lbs
Sample 6 percent elongation: 47 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 2708.2 psi
Sample 2 Ultimate strength : 2791.9 psi
Sample 3 Ultimate strength: 2646.8 psi
Sample 4 Ultimate strength: 2748 psi
Sample 5 Ultimate strength: 2909.4 psi
Sample 6 Ultimate strength : 2597.7 psi
Ultimate Strength Average: 2734 psi
Percent Elongation Average: 54 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/25/2025 ✔