Summary for Test 2025-07-01-45-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 1001417 DEA: 022J7504 EFIS: 0221000131 |
|---|---|
| DIST-CO-RTE-PM | 02-MOD-299-33.5/37.5 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Crowder Flat Pavement Roadway Rehabilitation |
| Location Description | In Modoc County near Alturas from 3.6 miles west of Crowder Flat Road to 0.3 mile west of Rattlesnake Creek Bridge |
| QA Service Level | 1 (Verified on 07/22/2025) |
Sample Information
| Sample Taken Date | 07/01/2025 | Sample Unique Key | 45 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/01/2025 | Sample type | Preliminary |
| A brief description of the sample | 2 Bags Native Soil | The quantity of what the sample constitutes | Sand, Silt, Rock and Soil |
| From where was the sample collected | Source | First name of sampler or witnessed by | Colt |
| Last name of sampler or witnessed by | Sweeny | Title of sampler | MREA |
| Telephone number of sampler | Laboratory sample identification | D79944 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | CALTRANS | |
| Transportation Laboratory (TL) Number | 000003 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Soil | The fabricator's/manufacturer's product name for the sample | |
|---|---|---|---|
| The fabricator/manufacturer designation for the sample | A detailed description of where the material sample was collected | Shoulder MOD 299 pm 35.00 | |
| Where the material sample would have been placed if not sampled |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-07-01-45
DIME Test ID: 2025-07-01-45-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2025-07-28
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Josh Murphy
Date of test: 07/24/2025
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 13107 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 195.0 grams | 99 % | |||||
| 195.0 grams | 99 % | |||||
| 423.0 grams | 97 % | |||||
| 500.0 grams | 96 % | |||||
| 595.0 grams | 95 % | |||||
| 699.0 grams | 95 % | |||||
| 931.0 grams | 93 % | |||||
| 490.7 grams | ||||||
| 47.2 grams | 84 % | |||||
| 95.1 grams | 75 % | |||||
| 147.5 grams | 65 % | |||||
| 198.7 grams | 55 % | |||||
| 261.7 grams | 43 % | |||||
| 321.9 grams | 32 % | |||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/28/2025 ✔