Summary for Test 2025-06-17-112-5

Test performed: CTM 389-19

Project Information

Project IdentifiersProject ID: 1000636
DEA: 024H03U4
EFIS: 0224000026
DIST-CO-RTE-PM02-PLU-89-12.9/20.0,20.6/21.0
Award Date12/20/2024
Closeout DateNot set
Work DescriptionHMA OVERLAY.
Location DescriptionPLUMAS COUNTY IN AND NEAR GREENVILLE FROM 0.8 MILE SOUTH OF DIXIE CANYON ROAD TO WOLF CREEK BRIDGE AND FROM MILL STREET TO 0.4 MILE NORTH OF HILLSIDE DRIVE
QA Service Level1 (Verified on 09/24/2024)

Sample Information

Sample Taken Date06/17/2025 Sample Unique Key112
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/18/2025
Sample typeProduction Start-Up A brief description of the sample16 boxes of Lime Treated 1/2-inch Type A HMA (eq. PG 64-16)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byDawn Last name of sampler or witnessed bySloatermen
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79908 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek Construction & Materials — Ward Lake Plant (Litchfield, CA) Transportation Laboratory (TL) Number857989
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number2307P02
Binder content (%)6.2 Virgin binder PGPG 58-22
Design binder PG PG 64-16 Binder SupplierAlbina (Klamath Falls, OR)
RAP content (%)25 WMA AdditivesNo
Antistrip type1.0% Lime

Test Details

DIME Sample ID: 2025-06-17-112
DIME Test ID: 2025-06-17-112-5
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2025-07-24

Test Results


Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method: PMLC
Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 06/25/2025
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 2.14 mm
Maximum impression at 5000 passes (right wheel): 2.12 mm
Average impression at 5000 passes (left/right avg): 2.13 mm
Maximum impression at 10000 passes (left wheel): 2.57 mm
Maximum impression at 10000 passes (right wheel): 2.62 mm
Average impression at 10000 passes (left/right avg): 2.59 mm
Maximum impression at 15000 passes (left wheel): 2.84 mm
Maximum impression at 15000 passes (right wheel): 2.92 mm
Average impression at 15000 passes (left/right avg): 2.88 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): CT 360: SA=0.4g/cm²; CT 389: Nf>15000, Rut@Nf=0.1in., SIP>15000

Test File Attachments

File NameExtensionFile SizeDate UploadedTest IDActions
D79908, 857989, 02-4H03U3, HWTpdf732.92 KB07/24/20252025-06-17-112-5   Info

Test was verified on 7/24/2025