Summary for Test 2025-06-23-34-5
Test performed: AASHTO T313-22Project Information
| Project Identifiers | Project ID: 1000014 DEA: 010H1504 EFIS: 0117000116 |
|---|---|
| DIST-CO-RTE-PM | 01-MEN-162-R0.0/25.7 |
| Award Date | 03/26/2024 |
| Closeout Date | Not set |
| Work Description | HMA, RHMA, AND GEOSYNTHETIC PAVEMENT INTERLAYER. |
| Location Description | MENDOCINO COUNTY NEAR LONGVALE FROM ROUTE 101 TO 1.1 MILES SOUTH OF POONKINNEY ROAD NEAR COVELO |
| QA Service Level | 1 (Verified on 01/10/2024) |
Sample Information
| Sample Taken Date | 06/23/2025 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/27/2025 |
| Sample type | Quality Assurance | A brief description of the sample | 1 can PG 58-22 |
| The quantity of what the sample constitutes | 1 can binder | From where was the sample collected | Source |
| First name of sampler or witnessed by | Granite QC | Last name of sampler or witnessed by | Granite |
| Title of sampler | Plant QC | Telephone number of sampler | |
| Laboratory sample identification | 25-110 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Granite Ukiah | Transportation Laboratory (TL) Number | 778806 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | Lot number | 1 | |
| Sublot number | 1 | Tank number | |
| Time of sample | 07:41 | HMA Supplier | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-06-23-34
DIME Test ID: 2025-06-23-34-5
Testing Lab: Atlas - Denver
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2025-07-25
Test Results
Input Type: Measured
Tester's full name: Atlas
Date of test: 07/16/2025
Minimum test bath temperature at 240 s: -12.0 C
Maximum test bath temperature at 240 s: -11.9 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: no data
Estimated Stiffness Modulus 60.0 s: 125.000 MPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.365
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 7/25/2025 ✔