DIME - Test Summary

Summary for Test 2025-07-03-26-1

Test performed: CTM 524-March 2013

Project Identifiers	Project ID: 214649 DEA: 07316004 EFIS: 0715000194
DIST-CO-RTE-PM	07-LA-14-60.70
Award Date	02/07/2023
Closeout Date	Not set
Work Description	REHABILITATION FOR THE ON/OFF RAMPS AND ADJACENT SHOULDERS. UPGRADING METAL BEAM GUARDRAILS, AC DIKES, SIGN PANELS, CURB RAMPS, TRAFFIC LOOPS DETECTORS, AND SOME OTHER HIGHWAY APPURTENANCES.
Location Description	ROUTE 14 FROM PALMDALE BLVD TO KERN COUNTRY LINE.
QA Service Level	1 (Verified on 01/29/2020)

Sample Taken Date	07/03/2025	Sample Unique Key	26
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/03/2025
Sample type	Quality Assurance	A brief description of the sample	JPCP-RSC Beams
The quantity of what the sample constitutes	10 CY	From where was the sample collected	Job Site
First name of sampler or witnessed by	Aleksey	Last name of sampler or witnessed by	Souglobov
Title of sampler	Materials Tester	Telephone number of sampler	7075835090
Laboratory sample identification	25-2057	Linked DIME Sample ID
The fabricator/manufacturer/facility name	N/A	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name	Atkinson Batch Plant, Lancaster	Bid Item	Not set

Material Type	Concrete	The concrete mix design number	12622-JPCPRSC-01
The truck number from where the sample was collected	Truck NA	The batch plant ticket number from where the sample was collected	Trail Batch 1
Concrete batch plant		The fabricator/manufacturer designation for the sample
A detailed description of where the material sample was collected	Jobsite	Where the material sample would have been placed if not sampled
From Lot No.		Bag Lot No.

DIME Sample ID: 2025-07-03-26

DIME Test ID: 2025-07-03-26-1

Testing Lab: Alta Vista Solutions - Whittier

Test Method: CTM 524-March 2013: Method of Test for Flexural Strength Of Rapid Strength Concrete

Test Release Date: 2025-07-23

Number of specimens: 3

Does the testing machine measure load or stress on the beam specimen?: Load

Fracture initiates in the tension surface: Within the Middle Third of the Span Length

Fracture occurred at a capped section: No

Is a beam dimensional correction factor used?: No

Input Type: Measured

Tester's full name: Aleksey Souglobov

Date of test: 07/03/2025

Identification number: 25-2057

Width of specimen: 6 inch

Width of specimen 2: 6 inch

Width of specimen 3: 5.9375 inch

Depth of specimen: 6.0625 inch

Depth of specimen 2: 6.0625 inch

Depth of specimen 3: 6.0625 inch

Span length of specimen: 18 inch

Span length of specimen 2: 18 inch

Span length of specimen 3: 18 inch

Maximum load applied: 11757 lb

Maximum load applied 2: 11555 lb

Maximum load applied 3: 11805 lb

Curing history and apparent moisture condition of the specimen: Sand

If specimen was capped, ground or if leather shims were used: No

Defects in specimen, including numbers of beams discarded during test: No

Age of specimen: 10 days

Age of specimen in hours: no data

Modulus of rupture: 1010 psi

Modulus of rupture 2: 990 psi

Modulus of rupture 3: 1020 psi

Modulus of rupture average: 1010 psi

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/23/2025 ✔