Summary for Test 2025-05-02-65-1
Test performed: ASTM A722-18Project Information
| Project Identifiers | Project ID: 215620 DEA: 01436404 EFIS: 0100000193 |
|---|---|
| DIST-CO-RTE-PM | 01-DN-101-35.8/36.5 |
| Award Date | 07/11/2022 |
| Closeout Date | Not set |
| Work Description | Dr. Fine Bridge Replacement |
| Location Description | DR. FINE BRIDGE REPLACEMENT FROM LAKE EARL DR TO S FRED D. HAIGHT DR ON HWY 101 ACROSS SMITH RIVER. |
| QA Service Level | 1 (Verified on 03/26/2021) |
Sample Information
| Sample Taken Date | 05/02/2025 | Sample Unique Key | 65 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/14/2025 | Sample type | Quality Assurance |
| A brief description of the sample | 3" A722 Threaded Bar | The quantity of what the sample constitutes | 3 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | NA |
| Last name of sampler or witnessed by | NA | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Williams Form Eng | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Threaded Bar | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Threaded Bar Specification | ASTM A722 | Threaded Bar Grade | 150 |
| Threaded Bar Type | Rebar Size | ||
| Nut Specification for Threaded Bar | A29 | System Manufacturer | Williams Form |
| Epoxy Coating Color | NA | Threaded Bar Application | |
| Coating Standards | Uncoated | Bar Heat Number(s) | 1000226351 |
| Nut Heat Number(s) | X9953 | Bar Lot Number | |
| Nut Lot Number | 75Y2D | Coupler Heat Number(s) | |
| Coupler Grade |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-05-02-65
DIME Test ID: 2025-05-02-65-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A722-18: Standard Specification for High-Strength Steel Bars for Prestressed Concrete (Tensile)
Test Release Date: 2025-07-23
Test Results
Number of Threaded Bar Samples: 3
Input Type: Measured
Tester's full name: Andrew Auvinen
Date of test: 07/23/2025
UTM: NA
Temperature: 72 f
| Num | Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Reduction of area (%) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 3 | NA | 6.85 | 0 | 129900 | 0 | 0 | NA | Smith Emery |
| 2 | 2 | 3 | NA | 6.85 | 0 | 130200 | 0 | 0 | NA | Smith Emery |
| 3 | 3 | 3 | NA | 6.85 | 0 | 132600 | 0 | 0 | NA | Smith Emery |
General comments (publicly viewable) (Max 1000 characters): Did not pull to break, UTM stopped test at capacity.
Test was verified on 7/23/2025 ✔