Summary for Test 2025-07-15-36-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 1000926 DEA: 061G8304 EFIS: 0624000171 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE-99-19.9/21.4 |
| Award Date | 03/27/2025 |
| Closeout Date | 11/10/2025 |
| Work Description | REPLACE CONCRETE SLABS WITH HMA, COLD PLANE AND PLACE HMA (TYPE A). |
| Location Description | FRESNO COUNTY IN FRESNO FROM 0.1 MILE NORTH OF CALIFORNIA AVENUE OVERCROSSING TO 0.1 MILE SOUTH OF EL DORADO STREET OVERCROSSING |
| QA Service Level | 1 (Verified on 03/04/2025) |
Sample Information
| Sample Taken Date | 07/15/2025 | Sample Unique Key | 36 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 07/16/2025 | Sample type | Quality Assurance |
| A brief description of the sample | 3/4” HMA Aggregate | The quantity of what the sample constitutes | 0-750 Tons Produced |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | vulcan materials |
| Last name of sampler or witnessed by | Vulcan Materials | Title of sampler | Materials Tester |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Material Ashlan Plant | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 1 |
| Sublot number | 8 | HMA Mix Number | |
| Binder content (%) | 0.0 | Virgin binder PG | |
| Design binder PG | Binder Supplier | ||
| RAP content (%) | Not set | WMA Additives | |
| Antistrip type |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-07-15-36
DIME Test ID: 2025-07-15-36-1
Testing Lab: CT D06 - Millbrook Field Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-07-16
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Tomas Silva
Date of test: 07/16/2025
Test procedure used?: Method A
Mass of the specimen basket assembly: 3980.7 g
Mass of the specimen and specimen basket assembly prior to ignition: 6170.3 g
Mass of HMA Sample prior to ignition: 2189.6 g
Mass Loss: 97.9 g
Mass of aggregate remaining after ignition: 2091.7 g
Correction Factor (Percent by mass of HMA Specimen): 0.00 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 4.47 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/16/2025 ✔