Summary for Test 2025-05-29-102-4
Test performed: CTM 521-June 2020
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 1000575 DEA: 11430904 EFIS: 1119000199 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5,805-Var |
| Award Date | 02/12/2025 |
| Closeout Date | Not set |
| Work Description | RESURFACE BRIDGE, REPLACE BRIDGE BARRIER, MGS, AND MODIFY ELECT. |
| Location Description | SAN DIEGO COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 04/04/2025) |
Sample Information
| Sample Taken Date | 05/29/2025 | Sample Unique Key | 102 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/30/2025 |
| Sample type | Quality Control | A brief description of the sample | structural concrete |
| The quantity of what the sample constitutes | 6 CY placed | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Louis | Last name of sampler or witnessed by | Riley |
| Title of sampler | Assistant QC Manager | Telephone number of sampler | (909) 989-1751 |
| Laboratory sample identification | 1 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Robertson's Ready Mix (El Cajon) | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Barrier Wall Foundation | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | RRM20038 |
|---|---|---|---|
| The truck number from where the sample was collected | 1933 | The batch plant ticket number from where the sample was collected | 1429642 |
| Concrete batch plant | El Cajon Plant | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | Obtained 1cy weights of approved mix design #RRM20038. One 6cy load was batched at 23:26. | Where the material sample would have been placed if not sampled | Barrier Wall Foundation, STA. 634+00 |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-05-29-102
DIME Test ID: 2025-05-29-102-4
Testing Lab: RMA Group - Rancho Cucamonga
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2025-07-10
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Jesse Lara
Date of test: 06/28/2025
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.00 in
Maximum load on cylinder 1: 111340 lb
Maximum load on cylinder 2: 115210 lb
Type of fracture pattern of cylinder 1: 5
Type of fracture pattern of cylinder 2: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Age of specimen: 28 days
Age of specimen in hours: 672 hours
Cross sectional area of cylinder 1: 28.27 in^2
Cross sectional area of cylinder 2: 28.27 in^2
Compressive strength (to nearest 10 psi): 4010 psi
General comments (publicly viewable) (Max 1000 characters): 28-day Compressive Strength
Cylinder 1: 3940 psi
Cylinder 2: 4070 psi
Average: 4010 psi
Test was verified on 7/10/2025 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.