Summary for Test 2025-06-02-90-3

Test performed: CTM 389-19

Project Information

Project IdentifiersProject ID: 1000698
DEA: 024H0704
EFIS: 0218000074
DIST-CO-RTE-PM02-LAS-139-0.74/11.0
Award Date01/29/2025
Closeout DateNot set
Work DescriptionPLACE HMA (TYPE A), TRAFFIC CONTROL SYSTEM, TRAFFIC STRIPE, RDWY EXC.
Location DescriptionLASSEN COUNTY NEAR SUSANVILLE FROM 0.1 MILE NORTH OF CHESTNUT STREET TO 2.6 MILES SOUTH OF HORSE LAKE ROAD
QA Service Level1 (Verified on 10/24/2024)

Sample Information

Sample Taken Date06/02/2025 Sample Unique Key90
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/04/2025
Sample typeAcceptance A brief description of the sample6 boxes of Lime Treated 3/4-inch Type A HMA (eq. PG 64-28)
The quantity of what the sample constitutes10,000 tons From where was the sample collectedManufacturer
First name of sampler or witnessed byJoe Last name of sampler or witnessed byDelgado
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD79898 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek Construction & Materials — Ward Lake Plant (Litchfield, CA) Transportation Laboratory (TL) Number996946
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Test Details

DIME Sample ID: 2025-06-02-90
DIME Test ID: 2025-06-02-90-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2025-07-08

Test Results


Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method:
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 06/12/2025
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.58 mm
Maximum impression at 5000 passes (right wheel): 2.05 mm
Average impression at 5000 passes (left/right avg): 1.82 mm
Maximum impression at 10000 passes (left wheel): 1.8 mm
Maximum impression at 10000 passes (right wheel): 2.63 mm
Average impression at 10000 passes (left/right avg): 2.21 mm
Maximum impression at 15000 passes (left wheel): 2.14 mm
Maximum impression at 15000 passes (right wheel): 2.94 mm
Average impression at 15000 passes (left/right avg): 2.54 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): Nf>15000, SIP>15000

Test File Attachments

File NameExtensionFile SizeDate UploadedTest IDActions
D79898, 996946, 02-4H0703, HWTpdf734.80 KB07/08/20252025-06-02-90-3   Info

Test was verified on 7/8/2025