Summary for Test 2025-06-04-44-2
Test performed: ASTM D412-06a-re13Project Information
| Project Identifiers | Project ID: 1000015 DEA: 033H8304 EFIS: 0318000075 |
|---|---|
| DIST-CO-RTE-PM | 03-PLA-49-3.5/7.5 |
| Award Date | 01/06/2025 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT SIDEWALKS, CURB RAMPS AND DRAINAGE FACILITIES. CONSTRUCT PEDESTRIAN BRIDGE |
| Location Description | PLACER COUNTY IN AND NEAR AUBURN FROM 0.3 MILE NORTH OF ROUTE 80/49 SEPARATION TO 0.1 MILE NORTH OF DRY CREEK ROAD |
| QA Service Level | 1 (Verified on 01/18/2024) |
Sample Information
| Sample Taken Date | 06/04/2025 | Sample Unique Key | 44 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/09/2025 | Sample type | Quality Assurance |
| A brief description of the sample | Bearing Pad | The quantity of what the sample constitutes | 13 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | William |
| Last name of sampler or witnessed by | Shanklin | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Scougal Rubber | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 25816-1 |
|---|---|---|---|
| Material/Compound/Elastomer ID | NA | Samples Representing | 13 |
| Description (size) | 1.15" x 8" x 10" | Comments | |
| Description (Number of Shims) | 2 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
| Batch Number | NA |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-06-04-44
DIME Test ID: 2025-06-04-44-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2025-07-03
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: psi
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 07/01/2025
UTM: NA
Humidity: 0 %
Temperature: 0 f
Sample 1 Median Thickness: 0.062 in
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2617 psi
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.068 in
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2322 psi
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.065 in
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2577 psi
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2577 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/3/2025 ✔