Summary for Test 2025-05-20-98-7

Test performed: CTM 389-19

Project Information

Project IdentifiersProject ID: 994859
DEA: 021H5904
EFIS: 0216000025
DIST-CO-RTE-PM02-SIS-96-43.5,57.0
Award Date08/07/2023
Closeout DateNot set
Work DescriptionREPLACE CULVERTS WITH BRIDGES, STREAMBED RESTORATION, & LANDSCAPING.
Location DescriptionSISKIYOU COUNTY AT AND NEAR HAPPY CAMP AT 0.8 MILE WEST OF GORDON\\'S FERRY ROAD AND AT PORTUGUESE CREEK
QA Service Level1 (Verified on 08/10/2023)

Sample Information

Sample Taken Date05/20/2025 Sample Unique Key98
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/23/2025
Sample typeProduction Start-Up A brief description of the sample12 boxes of Lime Treated 1/2-inch Type A HMA (PG 64-28 M)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byPEI Last name of sampler or witnessed byPEI
Title of sampler Telephone number of sampler
Laboratory sample identificationD79892 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMercer-Fraser Company — Willow Creek Plant (Willow Creek, CA) Transportation Laboratory (TL) NumberNone
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Test Details

DIME Sample ID: 2025-05-20-98
DIME Test ID: 2025-05-20-98-7
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2025-07-01

Test Results


Specified number of passes at 12.7 mm: 15000
Specimen Preparation Method:
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 06/02/2025
Test Temperature: 122 F
Compaction Method: SGC Cylindrical Specimen
Air Void Content for specimen A-1: no data
Air Void Content for specimen A-2: no data
Air Void Content for specimen B-1: no data
Air Void Content for specimen B-2: no data
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.95 mm
Maximum impression at 5000 passes (right wheel): 1.98 mm
Average impression at 5000 passes (left/right avg): 1.96 mm
Maximum impression at 10000 passes (left wheel): 2.55 mm
Maximum impression at 10000 passes (right wheel): 2.5 mm
Average impression at 10000 passes (left/right avg): 2.53 mm
Maximum impression at 15000 passes (left wheel): 3.05 mm
Maximum impression at 15000 passes (right wheel): 2.88 mm
Average impression at 15000 passes (left/right avg): 2.97 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
Raw Data: no data
General comments (publicly viewable) (Max 1000 characters): CT 360: SA=0.2g/cm²; CT 389: Nf>15000, SIP>15000

Test File Attachments

File NameExtensionFile SizeDate UploadedTest IDActions
D79892, ______, 02-1H5903, HWTpdf851.06 KB07/01/20252025-05-20-98-7   Info

Test was verified on 7/1/2025