Summary for Test 2025-06-17-100-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 1000636 DEA: 024H03U4 EFIS: 0224000026 |
|---|---|
| DIST-CO-RTE-PM | 02-PLU-89-12.9/20.0,20.6/21.0 |
| Award Date | 12/20/2024 |
| Closeout Date | Not set |
| Work Description | HMA OVERLAY. |
| Location Description | PLUMAS COUNTY IN AND NEAR GREENVILLE FROM 0.8 MILE SOUTH OF DIXIE CANYON ROAD TO WOLF CREEK BRIDGE AND FROM MILL STREET TO 0.4 MILE NORTH OF HILLSIDE DRIVE |
| QA Service Level | 1 (Verified on 09/24/2024) |
Sample Information
| Sample Taken Date | 06/17/2025 | Sample Unique Key | 100 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/18/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 1 bag of Combined Lime Treated 1/2-inch Virgin Aggregate |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Dawn | Last name of sampler or witnessed by | Sloatermen |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | D79907 | Linked DIME Sample ID | 857988 |
| The fabricator/manufacturer/facility name | Hat Creek Construction & Materials — Ward Lake Plant (Litchfield, CA) | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008::Ward Lake Pit (Litchfield, CA) |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Cold Feed Sampling Chute | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
| Combined Gradation Report Id | Bin Index | Dime Test Id |
|---|---|---|
| 2025-06-16: HMA Aggregates (Size 1/2"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP | 1 | 2025-06-17-100-1 |
| 2025-07-14: JMF 23-07-P02 | 1 | 2025-06-17-100-1 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-06-17-100
DIME Test ID: 2025-06-17-100-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2025-06-26
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Dacota Mei
Date of test: 06/26/2025
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 2031.4 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 97.8 grams | 95 % | |||||
| 368.4 grams | 82 % | |||||
| 1006.6 grams | 50 % | |||||
| 510.7 grams | ||||||
| 205.5 grams | 30 % | |||||
| 315.8 grams | 19 % | |||||
| 380.9 grams | 13 % | |||||
| 421.8 grams | 9 % | |||||
| 448.0 grams | 6 % | |||||
| 464.1 grams | 4.6 % | |||||
| 464.3 grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/26/2025 ✔