Summary for Test 2025-06-08-10-10
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 1000683 DEA: 11056404 EFIS: 1124000359 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-11-0.6/2.7 |
| Award Date | 12/20/2024 |
| Closeout Date | 01/06/2026 |
| Work Description | PERFORM GRADING, CONSTRUCT DRAINAGE FACILITIES, SIGNS AND STRIPING. |
| Location Description | SAN DIEGO COUNTY NEAR SAN DIEGO FROM 0.2 MILE WEST OF SANYO AVENUE UNDERCROSSING TO 0.2 MILE EAST OF SIEMPRE VIVA ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 01/17/2025) |
Sample Information
| Sample Taken Date | 06/08/2025 | Sample Unique Key | 10 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 06/10/2025 | Sample type | Verification |
| A brief description of the sample | JMFV | The quantity of what the sample constitutes | 2 bags |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Gerardo |
| Last name of sampler or witnessed by | Cordero | Title of sampler | TET |
| Telephone number of sampler | 6199366795 | Laboratory sample identification | 25-06-08-10-JMFV |
| Linked DIME Sample ID | 2025-06-08-9 | The fabricator/manufacturer/facility name | Vulcan Otay |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | 326122 Otay SJR |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-06-08-10
DIME Test ID: 2025-06-08-10-10
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2025-06-24
Test Results
Does this test use 1/4 sieve?: No
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Shawn Rivers
Date of test: 06/24/2025
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 1421.5 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 69.6 grams | 95 % | |||||
| 250.1 grams | 82 % | |||||
| 832.2 grams | 41 % | |||||
| 1064.1 grams | 25 % | |||||
| 1197.5 grams | 16 % | |||||
| 1273.1 grams | 10 % | |||||
| 1320.3 grams | 7 % | |||||
| 1349.8 grams | 5 % | |||||
| 1364.7 grams | 4.0 % | |||||
General comments (publicly viewable) (Max 1000 characters): Complies
Test was verified on 6/24/2025 ✔