Summary for Test 2025-04-22-95-11
Test performed: AASHTO T304-11
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 995002 DEA: 010H5804 EFIS: 0117000238 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-299-R7.6/R29.2 |
| Award Date | 09/25/2023 |
| Closeout Date | Not set |
| Work Description | RHMA, HMA AND REPLACE AC SURFACING. |
| Location Description | HUMBOLDT COUNTY AT VARIOUS LOCATIONS FROM 0.5 MILE EAST OF BLUE LAKE BOULEVARD TO 0.1 MILE EAST OF TITLOW HILL ROW |
| QA Service Level | 1 (Verified on 08/07/2023) |
Sample Information
| Sample Taken Date | 04/22/2025 | Sample Unique Key | 95 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/29/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 1/2-inch Type G Aggregate |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | G. | Last name of sampler or witnessed by | Thorpe |
| Title of sampler | Inspector | Telephone number of sampler | |
| Laboratory sample identification | D79862 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Kernen Construction — Hatchery Lane Facility (Arcata, CA) | Transportation Laboratory (TL) Number | 972443 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-12-0066::Ford Ranch Rock Quarrys |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Cold Feed | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
| The concrete mix design number | Lot number | 1 | |
| Sublot number | 1 | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-04-22-95
DIME Test ID: 2025-04-22-95-11
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Test Release Date: 2025-06-03
Test Results
What test method is performed?: Method A
Input Type: Measured
Tester's full name: Josh Ferency
Date of test: 05/29/2025
Mass of measure: 190.2 grams
Bulk dry specific gravity: 2.556
Mass of sample and measure #1: 333.2 grams
Mass of sample and measure #2: 333.3 grams
Volume of cylinder: 100.1 mL
Mass of sample #1: 143.0 grams
Mass of sample #2: 143.1 grams
Uncompacted voids #1: 44.1 %
Uncompacted voids #2: 44.1 %
Average uncompacted voids: 44.1 %
General comments (publicly viewable) (Max 1000 characters): Us=44.1%. This value was determined assuming the aggregate specific gravity was equivalent to the unwashed fine bulk specific gravity (AASHTO T 84) from the CEM-3513, dated 2024-10-08, for Mix ID 24-216, for use on 01-0H5804.
Test was verified on 6/3/2025 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.