Summary for Test 2025-04-22-95-3

Test performed: AASHTO T335-09r13

Project Information

Project IdentifiersProject ID: 995002
DEA: 010H5804
EFIS: 0117000238
DIST-CO-RTE-PM01-HUM-299-R7.6/R29.2
Award Date09/25/2023
Closeout DateNot set
Work DescriptionRHMA, HMA AND REPLACE AC SURFACING.
Location DescriptionHUMBOLDT COUNTY AT VARIOUS LOCATIONS FROM 0.5 MILE EAST OF BLUE LAKE BOULEVARD TO 0.1 MILE EAST OF TITLOW HILL ROW
QA Service Level1 (Verified on 08/07/2023)

Sample Information

Sample Taken Date04/22/2025 Sample Unique Key95
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/29/2025
Sample typeProduction Start-Up A brief description of the sample1/2-inch Type G Aggregate
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byG. Last name of sampler or witnessed byThorpe
Title of samplerInspector Telephone number of sampler
Laboratory sample identificationD79862 Linked DIME Sample ID
The fabricator/manufacturer/facility nameKernen Construction — Hatchery Lane Facility (Arcata, CA) Transportation Laboratory (TL) Number972443
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-12-0066::Ford Ranch Rock Quarrys
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedCold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number1
Sublot number1 Aggregate Mix Number

Test Details

DIME Sample ID: 2025-04-22-95
DIME Test ID: 2025-04-22-95-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Test Release Date: 2025-06-03

Test Results


Method: 2 - Individual Fracture Determination
Aggregate Size and Fracture Type: Coarse 1 and 2 Faced and Fine 1 Faced
Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 06/03/2025
Percentage on the 1 ½ inch sieve: 0 %
Percentage on the 1 inch sieve: 0 %
Percentage on the ¾ inch sieve: 0 %
Percentage on the ½ inch sieve: 4.9 %
Percentage on the ⅜ inch sieve: 13.1 %
Percentage on the ¼ inch sieve: 32.4 %
Percentage on the No. 4 sieve: 16.5 %
Percentage on the No. 8 sieve: 14.1 %
Mass of fractured, 1 ½ inch, 2 faced particles tested: 0 g
Mass of questionable, 1 ½ inch, 2 faced particles tested: 0 g
Mass of unfractured, 1 ½ inch, 2 faced particles tested: 0 g
Mass of fractured, 1 ½ inch, 1 faced particles tested: 0 g
Mass of questionable, 1 ½ inch, 1 faced particles tested: 0 g
Mass of unfractured, 1 ½ inch, 1 faced particles tested: 0 g
Mass of fractured, 1 inch, 2 faced particles tested: 0 g
Mass of questionable, 1 inch, 2 faced particles tested: 0 g
Mass of unfractured, 1 inch, 2 faced particles tested: 0 g
Mass of fractured, 1 inch, 1 faced particles tested: 0 g
Mass of questionable, 1 inch, 1 faced particles tested: 0 g
Mass of unfractured, 1 inch, 1 faced particles tested: 0 g
Mass of fractured, ¾ inch, 2 faced particles tested: 0 g
Mass of questionable, ¾ inch, 2 faced particles tested: 0 g
Mass of unfractured, ¾ inch, 2 faced particles tested: 0 g
Mass of fractured, ¾ inch, 1 faced particles tested: 0 g
Mass of questionable, ¾ inch, 1 faced particles tested: 0 g
Mass of unfractured, ¾ inch, 1 faced particles tested: 0 g
Mass of fractured, ½ inch, 2 faced particles tested: 322.7 g
Mass of questionable, ½ inch, 2 faced particles tested: 0 g
Mass of unfractured, ½ inch, 2 faced particles tested: 6 g
Mass of fractured, ½ inch, 1 faced particles tested: 322.7 g
Mass of questionable, ½ inch, 1 faced particles tested: 0 g
Mass of unfractured, ½ inch, 1 faced particles tested: 6 g
Mass of fractured, ⅜ inch, 2 faced particles tested: 221.3 g
Mass of questionable, ⅜ inch, 2 faced particles tested: 0 g
Mass of unfractured, ⅜ inch, 2 faced particles tested: 0 g
Mass of fractured, ⅜ inch, 1 faced particles tested: 221.3 g
Mass of questionable, ⅜ inch, 1 faced particles tested: 0 g
Mass of unfractured, ⅜ inch, 1 faced particles tested: 0 g
Mass of fractured, ¼ inch, 2 faced particles tested: 108.7 g
Mass of questionable, ¼ inch, 2 faced particles tested: 0 g
Mass of unfractured, ¼ inch, 2 faced particles tested: 1.5 g
Mass of fractured, ¼ inch, 1 faced particles tested: 109.2 g
Mass of questionable, ¼ inch, 1 faced particles tested: 0 g
Mass of unfractured, ¼ inch, 1 faced particles tested: 1 g
Mass of fractured, No. 4, 2 faced particles tested: 107.6 g
Mass of questionable, No. 4, 2 faced particles tested: 0 g
Mass of unfractured, No. 4, 2 faced particles tested: 2.1 g
Mass of fractured, No. 4, 1 faced particles tested: 108.7 g
Mass of questionable, No. 4, 1 faced particles tested: 0 g
Mass of unfractured, No. 4, 1 faced particles tested: 1 g
Mass of fractured, No. 8, 1 faced particles tested: 28.8 g
Mass of questionable, No. 8, 1 faced particles tested: 0 g
Mass of unfractured, No. 8, 1 faced particles tested: 0 g
Percentage of questionable, 1 ½ inch, 2 faced particles tested: 0 %
Percentage of questionable, 1 ½ inch, 1 faced particles tested: 0 %
Percentage of questionable, 1 inch, 2 faced particles tested: 0 %
Percentage of questionable, 1 inch, 1 faced particles tested: 0 %
Percentage of questionable, ¾ inch, 2 faced particles tested: 0 %
Percentage of questionable, ¾ inch, 1 faced particles tested: 0 %
Percentage of questionable, ½ inch, 2 faced particles tested: 0 %
Percentage of questionable, ½ inch, 1 faced particles tested: 0 %
Percentage of questionable, ⅜ inch, 2 faced particles tested: 0 %
Percentage of questionable, ⅜ inch, 1 faced particles tested: 0 %
Percentage of questionable, ¼ inch, 2 faced particles tested: 0 %
Percentage of questionable, ¼ inch, 1 faced particles tested: 0 %
Percentage of questionable, No. 4, 2 faced particles tested: 0 %
Percentage of questionable, No. 4, 1 faced particles tested: 0 %
Percentage of questionable, No. 8, 1 faced particles tested: 0 %
Percentage of fractured, 1 ½ inch, 2 faced particles tested: 0 %
Percentage of fractured, 1 ½ inch, 1 faced particles tested: 0 %
Percentage of fractured, 1 inch, 2 faced particles tested: 0 %
Percentage of fractured, 1 inch, 1 faced particles tested: 0 %
Percentage of fractured, ¾ inch, 2 faced particles tested: 0 %
Percentage of fractured, ¾ inch, 1 faced particles tested: 0 %
Percentage of fractured, ½ inch, 2 faced particles tested: 98 %
Percentage of fractured, ½ inch, 1 faced particles tested: 98 %
Percentage of fractured, ⅜ inch, 2 faced particles tested: 100 %
Percentage of fractured, ⅜ inch, 1 faced particles tested: 100 %
Percentage of fractured, ¼ inch, 2 faced particles tested: 99 %
Percentage of fractured, ¼ inch, 1 faced particles tested: 99 %
Percentage of fractured, No. 4, 2 faced particles tested: 98 %
Percentage of fractured, No. 4, 1 faced particles tested: 99 %
Percentage of fractured, No. 8, 1 faced particles tested: 100 %
Weighted average percentage of fractured, coarse, 2 faced particles: 99 %
Weighted average percentage of fractured, coarse, 1 faced particles: 99 %
Percentage of fractured, fine, 1 faced particles tested: 100 %
General comments (publicly viewable) (Max 1000 characters): Pc2=99%, Pf1=100.%

Test was verified on 6/3/2025