Summary for Test 2025-05-15-40-1
Test performed: CTM 212-May 2010Project Information
| Project Identifiers | Project ID: 1000698 DEA: 024H0704 EFIS: 0218000074 |
|---|---|
| DIST-CO-RTE-PM | 02-LAS-139-0.74/11.0 |
| Award Date | 01/29/2025 |
| Closeout Date | 09/25/2026 |
| Work Description | PLACE HMA (TYPE A), TRAFFIC CONTROL SYSTEM, TRAFFIC STRIPE, RDWY EXC. |
| Location Description | LASSEN COUNTY NEAR SUSANVILLE FROM 0.1 MILE NORTH OF CHESTNUT STREET TO 2.6 MILES SOUTH OF HORSE LAKE ROAD |
| QA Service Level | 1 (Verified on 10/24/2024) |
Sample Information
| Sample Taken Date | 05/15/2025 | Sample Unique Key | 40 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 05/19/2025 | Sample type | Acceptance |
| A brief description of the sample | Import Borrow for use in embankment | The quantity of what the sample constitutes | 1 Bucket |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Joe |
| Last name of sampler or witnessed by | Delgado | Title of sampler | Consultant |
| Telephone number of sampler | Laboratory sample identification | D79883 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Hat Creek Construction | |
| Transportation Laboratory (TL) Number | 867332 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Undefined |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Embankment | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-05-15-40
DIME Test ID: 2025-05-15-40-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 212-May 2010: Method of Test for Unit Weight of Aggregate
Test Release Date: 2025-05-20
Test Results
Input Type: Measured
Tester's full name: Sean Mcwithey
Date of test: 05/20/2025
Which procedure was used to fill the measure with aggregate?: no data
Weight of water in the measure: 21.051 lbm
Water temperature: 78 deg F
Tare weight of empty measure: 12.976 lbm
Weight of measure filled with aggregate (test 1): 42.68 lbm
Weight of measure filled with aggregate (test 2): 43.082 lbm
Weight of measure filled with aggregate (test 3): 42.992 lbm
Water density: 62.24 lbf/ft^3
Factor F: 2.96 ft^-3
Net weight of aggregate in measure (test 1): 29.7 lbm
Net weight of aggregate in measure (test 2): 30.11 lbm
Net weight of aggregate in measure (test 3): 30.02 lbm
Average net weight of aggregate required to fill the measure: 29.94 lbm
Aggregate unit weight: 88.53 lbf/ft^3
General comments (publicly viewable) (Max 1000 characters): Unit W.=88.63
Test was verified on 5/20/2025 ✔