Summary for Test 2025-05-16-2-1
Test performed: AASHTO T166-16Project Information
| Project Identifiers | Project ID: 214135 DEA: 09213404 EFIS: 0900000030 |
|---|---|
| DIST-CO-RTE-PM | 09-INY-395-29.9/41.8 |
| Award Date | 10/22/2021 |
| Closeout Date | Not set |
| Work Description | ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT. |
| Location Description | INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE |
| QA Service Level | 1 (Verified on 05/03/2019) |
Sample Information
| Sample Taken Date | 05/16/2025 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/16/2025 |
| Sample type | Acceptance | A brief description of the sample | 1/2" HMA-A PG 64-28M R15 |
| The quantity of what the sample constitutes | 4 boxes | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Colton | Last name of sampler or witnessed by | Carrington |
| Title of sampler | TET | Telephone number of sampler | 7608748279 |
| Laboratory sample identification | HMA-F33 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Fisher Sand and Gravel | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
DIME Sample ID: 2025-05-16-2
DIME Test ID: 2025-05-16-2-1
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T166-16: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens (Method A)
Test Release Date: 2025-05-20
Test Results
Number of tests: 4
Input Type: Measured
Tester's full name: Derek Carrington
Date of test: 05/19/2025
Mass 1 of the specimen in air: 2454.2 g
Mass 1 of the surface dry specimen in air: 2460.1 g
Mass 1 of the specimen in water: 1395.0 g
Mass 2 of the specimen in air: 2453.8 g
Mass 2 of the surface dry specimen in air: 2459.3 g
Mass 2 of the specimen in water: 1394.1 g
Mass 3 of the specimen in air: 2454.1 g
Mass 3 of the surface dry specimen in air: 2459.2 g
Mass 3 of the specimen in water: 1395.4 g
Mass 4 of the specimen in air: 2453.3 g
Mass 4 of the surface dry specimen in air: 2458.7 g
Mass 4 of the specimen in water: 1394.8 g
Bulk Specific Gravity 1: 2.304
Bulk Specific Gravity 2: 2.304
Bulk Specific Gravity 3: 2.307
Bulk Specific Gravity 4: 2.306
Percent of water absorbed by volume 1: 0.55 %
Percent of water absorbed by volume 2: 0.52 %
Percent of water absorbed by volume 3: 0.48 %
Percent of water absorbed by volume 4: 0.51 %
Average Bulk Specific Gravity: 2.305
General comments (publicly viewable) (Max 1000 characters): HMA-F33
Test was verified on 5/20/2025 ✔
