Summary for Test 2025-04-21-1-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 994326 DEA: 051C3604 EFIS: 0512000134 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-217-0.9/1.4 |
| Award Date | 01/31/2023 |
| Closeout Date | Not set |
| Work Description | REPLACE BRIDGE. |
| Location Description | SANTA BARBARA COUNTY NEAR GOLETA FROM 0.2 MILE EAST OF GOLETA SLOUGH BRIDGE TO 0.4 MILE EAST OF SAN JOSE CREEK BRIDGE |
| QA Service Level | 1 (Verified on 10/17/2022) |
Sample Information
| Sample Taken Date | 04/21/2025 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/28/2025 |
| Sample type | Quality Assurance | A brief description of the sample | Flash Welded Rebar Hoops |
| The quantity of what the sample constitutes | 8 of 1934 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Alex | Last name of sampler or witnessed by | Temme |
| Title of sampler | QA | Telephone number of sampler | 415-238-5839 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | RKR | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L180-003-25 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Welded Hoops | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Rebar Heat Number(s) | 173522 |
| Hoop Manufacturer Lot Number(s) | 39 and 45 | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Size | #6 |
| Diameter of Hoop | 2'-6" | Epoxy Coated | No |
| Epoxy Coating Color | NA | Rebar Manufacturer | Cascade |
| Welding Company | RKR Steel Welding | Coating Standards | Uncoated |
| Weld Type | Flash Welded |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-04-21-1
DIME Test ID: 2025-04-21-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Test Release Date: 2025-05-19
Test Results
Number of Samples: 8
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 05/19/2025
UTM: NA
Temperature: 0 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 39 | 6 | 0.44 | 42740 | 97000 | ok necking | Kleinfelder |
| 2 | 2 | 39 | 6 | 0.44 | 43340 | 98500 | ok necking | Kleinfelder |
| 3 | 3 | 39 | 6 | 0.44 | 42780 | 97000 | ok necking | Kleinfelder |
| 4 | 4 | 39 | 6 | 0.44 | 42350 | 96500 | ok necking | Kleinfelder |
| 5 | 1 | 45 | 6 | 0.44 | 43720 | 99500 | ok necking | Kleinfelder |
| 6 | 2 | 45 | 6 | 0.44 | 43230 | 98500 | ok necking | Kleinfelder |
| 7 | 3 | 45 | 6 | 0.44 | 42700 | 97000 | ok necking | Kleinfelder |
| 8 | 4 | 45 | 6 | 0.44 | 42990 | 97500 | ok necking | Kleinfelder |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/19/2025 ✔