Summary for Test 2025-05-14-25-1
Test performed: CTM 231-March 2013Project Information
| Project Identifiers | Project ID: 1000784 DEA: 07356504 EFIS: 0719000023 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-126-R14.6/R34.5 |
| Award Date | 01/23/2025 |
| Closeout Date | Not set |
| Work Description | INSTALL DPP INFILTRATION AREA AND HOT MIX ASPHALT. |
| Location Description | VENTURA COUNTY IN AND NEAR FILLMORE AT VARIOUS LOCATIONS FROM HALLOCK DRIVE TO 0.1 MILE WEST OF THE LOS ANGELES COUNTY LINE |
| QA Service Level | 1 (Verified on 11/11/2024) |
Sample Information
| Sample Taken Date | 05/14/2025 | Sample Unique Key | 25 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/14/2025 |
| Sample type | Acceptance | A brief description of the sample | 07-Ven-126 EB R18.7 Location 12 |
| The quantity of what the sample constitutes | 113 sy | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Sopheak | Last name of sampler or witnessed by | Chong |
| Title of sampler | TEC | Telephone number of sampler | 2138170174 |
| Laboratory sample identification | 25-1595 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | NA | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | 07-Ven-126 EB R18.7 Location 12 | Bid Item | Not set |
Material Information
| Material Type | Soil | The fabricator's/manufacturer's product name for the sample | Aggregate Base |
|---|---|---|---|
| The fabricator/manufacturer designation for the sample | various location A.B | A detailed description of where the material sample was collected | Jobsite |
| Where the material sample would have been placed if not sampled | Jobsite |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-05-14-25
DIME Test ID: 2025-05-14-25-1
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Test Release Date: 2025-05-15
Test Results
Method Type:: Direct Read
Number of Tests:: 3
Common Test Maximum Used:: No
Input Type: Measured
Tester's full name: Sopheak Chong
Date of test: 05/15/2025
Gage No.: 60137
Test No.: 2
Nuclear By: Sopheak Chong
Non-Bias Plan No.: 1
Depth: 7''
Material No.: Aggregate Base
Material Type: Aggregate Base
Impact By: Sopheak Chong
Standard Count Density: 2171 g/cc
Count or Density 1: 2.04 g/cc
Count or Density 2: 2.05 g/cc
Count or Density 3: 2.02 g/cc
Standard Count Moisture: 657 g/cc
Moisture Count 1: 0.16 g/cc
Moisture Count 2: 0.16 g/cc
Moisture Count 3: 0.14 g/cc
Sum of Count or Density: 6.11 g/cc
Average of Count or Density: 2.04 g/cc
Sum of Moisture Count: 0.46 g/cc
Average of Moisture Count: 0.15 g/cc
Calculated Percent Relative Compaction: 94.7 %
Reported Percent Relative Compaction: 95 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/15/2025 ✔