Summary for Test 2025-02-17-4-3
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 1000180 DEA: 081N2604 EFIS: 0822000126 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-2.2/8.5 |
| Award Date | 05/23/2024 |
| Closeout Date | 07/23/2025 |
| Work Description | FURNISH POLYESTER CONC OVERLAY, PLACE POLYESTER CONC OVERLAY. |
| Location Description | SAN BERNARDINO COUNTY IN AND NEAR FONTANA AT VARIOUS LOCATIONS FROM ROUTE 10 TO ROUTE 210 |
| QA Service Level | 1 (Verified on 05/15/2024) |
Sample Information
| Sample Taken Date | 02/17/2025 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/18/2025 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000151KBP | Linked DIME Sample ID | 000151KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ5B00213 |
|---|---|---|---|
| Batch Number | AZ5B00213 | Mix number | AZ5B00213 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-02-17-4
DIME Test ID: 2025-02-17-4-3
Testing Lab: Future Labs, LLC
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2025-05-01
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Alex Hamilton
Date of test: 04/11/2025
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.505 in
Sample 1 Thickness: 0.255 in
Sample 1 Area: 0.1288 in^2
Sample 1 Ultimate Strength Actual: 356 lbs
Sample 1 percent elongation: 56 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.509 in
Sample 2 Thickness: 0.243 in
Sample 2 Area: 0.1237 in^2
Sample 2 Ultimate Strength Actual: 354 lbs
Sample 2 percent elongation: 59 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.514 in
Sample 3 Thickness: 0.257 in
Sample 3 Area: 0.1321 in^2
Sample 3 Ultimate Strength Actual: 401 lbs
Sample 3 percent elongation: 60 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.511 in
Sample 4 Thickness: 0.255 in
Sample 4 Area: 0.1303 in^2
Sample 4 Ultimate Strength Actual: 378 lbs
Sample 4 percent elongation: 58 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.514 in
Sample 5 Thickness: 0.256 in
Sample 5 Area: 0.1316 in^2
Sample 5 Ultimate Strength Actual: 389 lbs
Sample 5 percent elongation: 61 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.511 in
Sample 6 Thickness: 0.261 in
Sample 6 Area: 0.1334 in^2
Sample 6 Ultimate Strength Actual: 386 lbs
Sample 6 percent elongation: 59 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 2764 psi
Sample 2 Ultimate strength : 2861.8 psi
Sample 3 Ultimate strength: 3035.6 psi
Sample 4 Ultimate strength: 2901 psi
Sample 5 Ultimate strength: 2955.9 psi
Sample 6 Ultimate strength : 2893.6 psi
Ultimate Strength Average: 2902 psi
Percent Elongation Average: 59 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/1/2025 ✔