Summary for Test 2025-04-16-8-1
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 1000681 DEA: 081J7204 EFIS: 0818000099 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-S0.0/S0.8,0.0/R15.0 |
| Award Date | 01/17/2025 |
| Closeout Date | 09/03/2026 |
| Work Description | REPLACE AC SURFACING, COLD PLANE AC PAVEMENT, HMA, RSP, AND MGS. |
| Location Description | SAN BERNARDINO COUNTY IN AND NEAR BARSTOW FROM 0.1 MILE WEST OF ROBERTA STREET TO MONTARA ROAD AND FROM ROUTE 15 TO 0.4 MILE EAST OF LAVA WASH BRIDGE |
| QA Service Level | 1 (Verified on 01/13/2025) |
Sample Information
| Sample Taken Date | 04/16/2025 | Sample Unique Key | 8 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/17/2025 | Sample type | Acceptance |
| A brief description of the sample | 3/4" HMA A SP R25 LSM 1.0% | The quantity of what the sample constitutes | 6 BOXES OF HMA, 1 QT PG64-16 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | FRANCISCO |
| Last name of sampler or witnessed by | RUVALCABA | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | 0225A-25 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Blue Diamond-Victorville | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | 2 |
| Sublot number | 21 | HMA Mix Number | 300154 R25 LSM |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-04-16-8
DIME Test ID: 2025-04-16-8-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-04-23
Test Results
What temperature unit is used?: Celsius
Input Type: Calculated
Tester's full name: Ayman Nabulsi
Date of test: 04/21/2025
Test procedure used?: Method A
Mass of HMA Sample prior to ignition: 2158.8 g
Mass Loss: 117.5 g
Correction Factor (Percent by mass of HMA Specimen): 0.43 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.14 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 4.87 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/23/2025 ✔