Summary for Test 2025-03-13-10-3
Test performed: ASME B1.2-83r17Project Information
| Project Identifiers | Project ID: 994828 DEA: 043Y4104 EFIS: 0423000232 |
|---|---|
| DIST-CO-RTE-PM | 04-CC,SM-680-25.04/25.46, VAR/VAR |
| Award Date | 05/19/2023 |
| Closeout Date | 06/30/2026 |
| Work Description | Paint removal and non-destructive testing (NDT) on butt weld connections on T1 type steel in fracture critical members of three distinct existing toll bridge. |
| Location Description | Carquinez Bridge Overhead (Br. No. 23-0015R), Benicia-Martinez Bridge Overhead (Br. No. 28-0153L), and San Mateo-Hayward Bridge (Br. No. 35-0054). County = SM,CC,SOL. Route = 680,80,92. |
| QA Service Level | 1 (Verified on 05/16/2023) |
Sample Information
| Sample Taken Date | 03/13/2025 | Sample Unique Key | 10 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 03/17/2025 | Sample type | Quality Assurance |
| A brief description of the sample | ASTM F3125 GR A325 HEAVY HEX BOLT | The quantity of what the sample constitutes | 78 bolts |
| From where was the sample collected | Supplier | First name of sampler or witnessed by | Yannick |
| Last name of sampler or witnessed by | Aranas | Title of sampler | AMR |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Bay Bolt Oakland, Ca | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | 7860-07 |
|---|---|---|---|
| Heat Number(s) | 10810530 8000029712 2242004 | Nut Mfg. Lot Number(s) | W000184125 |
| Washer Mfg. Lot Number(s) | 407825 | Bolt Specification | ASTM 3125 |
| Bolt Length(s) | 4-1/2" | Nut Specification | ASTM A563 |
| Washer Specification | F436 | Finish | Hot Dip Galvanized |
| Diameter/Size | 1-8 | Bolt Mfg. Lot Number | E560J1 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-03-13-10
DIME Test ID: 2025-03-13-10-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Test Release Date: 2025-04-03
Test Results
Input Type: Calculated
Tester's full name: Andrew Auvinen
Date of test: 03/19/2025
Sample No.: 1A
Rocap Number: no data
Heat Number(s): no data
Mfg. Lot Number: W000184125
Finish Coating: ASTM F2329 - Hot Dip
Product Markings: DH N
Size: 1 in
Gage Type: Pass
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/3/2025 ✔