Summary for Test 2024-09-03-66-8
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 995524 DEA: 021H3604 EFIS: 0216000040 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS-96-76.8/78.0 |
| Award Date | 03/22/2024 |
| Closeout Date | Not set |
| Work Description | REPLACE BRIDGE. |
| Location Description | SISKIYOU COUNTY NEAR HORSE CREEK FROM 0.4 MILE WEST OF KLAMATH RIVER BRIDGE TO 2.0 MILES WEST OF KOHL CREEK |
| QA Service Level | 1 (Verified on 12/27/2023) |
Sample Information
| Sample Taken Date | 09/03/2024 | Sample Unique Key | 66 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/03/2024 |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | Compressive Strength. Aggregate Test Report. Daily Field Placement Report. Qaulity Control Testing Summary |
| The quantity of what the sample constitutes | 1300 | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Mitchell | Last name of sampler or witnessed by | Whitlock |
| Title of sampler | QC Inspector | Telephone number of sampler | 9165469009 |
| Laboratory sample identification | SC3808 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Moores Sand and Gravel | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-47-0014::MOORES GRAVEL |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | The material was sampled at 28017 CA-96, Klamath River | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-09-03-66
DIME Test ID: 2024-09-03-66-8
Testing Lab: Myers and Sons Construction
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2025-02-25
Test Results
What size aggregate is being tested?: 0.375 in x No. 8 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Latif Kohistani
Date of test: 09/20/2024
| Sieve Size | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 100 % | ||||||
| 71 % | ||||||
| 18 % | ||||||
| 3 % | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test File Attachments
| File Name | Extension | File Size | Date Uploaded | Test ID | Actions |
|---|---|---|---|---|---|
| 09-20-24 02-1H6304 RTE 96 KCIDH CIPSC (Aggregates) | 246.04 KB | 02/25/2025 | 2024-09-03-66-8 | Info |
Test was verified on 2/25/2025 ✔