Summary for Test 2025-01-16-34-2
Test performed: ASTM D412-16r21Project Information
| Project Identifiers | Project ID: 212470 DEA: 044A1304 EFIS: 0400001106 COOP: 042718 |
|---|---|
| DIST-CO-RTE-PM | 04-SON-101-18.5/18.5 |
| Award Date | 11/17/2023 |
| Closeout Date | Not set |
| Work Description | CONSISTS OF MODIFICATION AND RECONSTRUCTION OF THE EXISTING US 101/HEARN AVENUE INTERCHANGE IN SONOMA COUNTY, INCLUDING REPLACING THE EXISTING TWO-LANE HEARN AVENUE OVERCROSSING WITH A NEW OVERCROSSING, AND MODIFYING THE SOUTHBOUND OFF-RAMP IN CITY |
| Location Description | IN SONOMA COUNTY. |
| QA Service Level | 1 (Verified on 09/23/2019) |
Sample Information
| Sample Taken Date | 01/16/2025 | Sample Unique Key | 34 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 01/22/2025 |
| Sample type | Quality Assurance | A brief description of the sample | Bearing Pad |
| The quantity of what the sample constitutes | 21 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Krishnamoorthy | Last name of sampler or witnessed by | Palaniappan |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Bridge Rubber Bearing | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 2527-1 |
|---|---|---|---|
| Material/Compound/Elastomer ID | NA | Samples Representing | 21 |
| Description (size) | 3.45" x 16" x 22" | Comments | |
| Description (Number of Shims) | 6 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Bridge Rubber Bearing |
| Batch Number | 144285 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-01-16-34
DIME Test ID: 2025-01-16-34-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2025-02-11
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: psi
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 02/11/2025
UTM: NA
Humidity: 0 %
Temperature: 0 f
Sample 1 Median Thickness: 0.087 in
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2354 psi
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.087 in
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2509 psi
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.081 in
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2515 psi
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2509 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/11/2025 ✔