Summary for Test 2024-12-05-86-6
Test performed: CTM 521-June 2020Project Information
| Project Identifiers | Project ID: 214698 DEA: 120N8904 EFIS: 1214000130 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-133-8.3/M9.3 |
| Award Date | 11/09/2023 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT AUXILIARY LANE. |
| Location Description | ORANGE COUNTY IN IRVINE FROM ROUTE 133/405 SEPARATION TO IRVINE CENTER DRIVE OVERCROSSING |
| QA Service Level | 1 (Verified on 02/22/2021) |
Sample Information
| Sample Taken Date | 12/05/2024 | Sample Unique Key | 86 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/06/2024 | Sample type | Quality Control |
| A brief description of the sample | 4x8 cylinders | The quantity of what the sample constitutes | 9 |
| From where was the sample collected | Job Site | First name of sampler or witnessed by | Andrew |
| Last name of sampler or witnessed by | Squires | Title of sampler | QC Field Technician |
| Telephone number of sampler | Laboratory sample identification | Set 1 | |
| Linked DIME Sample ID | Unknown | The fabricator/manufacturer/facility name | Job Site |
| Transportation Laboratory (TL) Number | Unknown | Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
| Structure unique identifier | 00-0000 | Structure name | Irvine Batch Plant, National Ready Mix |
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | S72C447T10 |
|---|---|---|---|
| The truck number from where the sample was collected | Load 2 | The batch plant ticket number from where the sample was collected | 0 |
| Concrete batch plant | Unknown | The fabricator/manufacturer designation for the sample | Set 1 |
| A detailed description of where the material sample was collected | Abutment 1 Approach Slab, Truck 466 | Where the material sample would have been placed if not sampled | Unknown |
| From Lot No. | Unknown | Bag Lot No. | Unknown |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-12-05-86
DIME Test ID: 2024-12-05-86-6
Testing Lab: G3 Quality, Incorporated - Cerritos
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Test Release Date: 2025-03-21
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Carlos Viramontes
Date of test: 01/02/2025
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 85911 lb
Maximum load on cylinder 2: 86892 lb
Maximum load on cylinder 3: 89520 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 2
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 28 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.57 in^2
Cross sectional area of cylinder 2: 12.57 in^2
Cross sectional area of cylinder 3: 12.57 in^2
Compressive strength (to nearest 10 psi): 6960 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/21/2025 ✔