Summary for Test 2025-01-16-37-1
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 214697 DEA: 07307104 EFIS: 0714000213 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-101-32.8 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | CONSTRUCT BRIDGE. |
| Location Description | LOS ANGELES COUNTY IN AND NEAR AGOURA HILLS FROM 0.1 MILE WEST OF LIBERTY CANYON ROAD UNDERCROSSING TO 0.6 MILE EAST OF PALO COMADO OVERCROSSING |
| QA Service Level | 1 (Verified on 07/12/2021) |
Sample Information
| Sample Taken Date | 01/16/2025 | Sample Unique Key | 37 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/23/2025 |
| Sample type | Acceptance | A brief description of the sample | 3/4" WMA-A 220200W SVA VLO |
| The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Bryan | Last name of sampler or witnessed by | Dorsch |
| Title of sampler | TWINING QC | Telephone number of sampler | |
| Laboratory sample identification | 25-009 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Materials Sun Valley | Transportation Laboratory (TL) Number | 011625 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | 220200W SVA VLO | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2025-01-16-37
DIME Test ID: 2025-01-16-37-1
Testing Lab: CT D07 - Materials Field Laboratory, Unit 1953
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2025-02-05
Test Results
Number of tests: 2
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Daniel Gomez
Date of test: 01/16/2025
Mass of the dry specimen in air: 1249.6 g
Mass of the dry specimen plus paraffin coating in air: 1259.8 g
Mass of the dry specimen plus paraffin coating in water: 718.1 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 1094.4 g
Mass 2 of the dry specimen plus paraffin coating in air: 1103.7 g
Mass 2 of the dry specimen plus paraffin coating in water: 637.7 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.356
Bulk Specific Gravity 2: 2.402
Average Bulk Specific Gravity: 2.379
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/5/2025 ✔