Summary for Test 2024-11-13-3-1
Test performed: ASTM A370-20Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 11/13/2024 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/13/2024 |
| Sample type | Quality Assurance | A brief description of the sample | Hex Bolt |
| The quantity of what the sample constitutes | 598 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Lund |
| Title of sampler | CT METS QA INSPECTOR | Telephone number of sampler | 8014626352 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Universal Industrial Sales Inc | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B390-159-24 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | na |
|---|---|---|---|
| Heat Number(s) | 20938780 | Nut Mfg. Lot Number(s) | na |
| Washer Mfg. Lot Number(s) | na | Bolt Specification | F1554 Gr 105 |
| Bolt Length(s) | 15" | Nut Specification | na |
| Washer Specification | na | Finish | HDG |
| Diameter/Size | 1-1/4" | Bolt Mfg. Lot Number | 2637-1 |
| Rocap Test Requirement(s) | na | Lubricant Requirements(s) | na |
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-11-13-3
DIME Test ID: 2024-11-13-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2025-02-06
Test Results
Number of Samples: 3
Input Type: Calculated
Tester's full name: Alexis Vargas-Bastida
Date of test: 01/13/2025
UTM: NA
Temperature: 0 f
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | 20938780 | 1.25 | 0.969 | 112890 | 129082 | 0 | Atlas Technical Consultants |
| 2 | 2A | 20938780 | 1.25 | 0.969 | 114768 | 131868 | 0 | Atlas Technical Consultants |
| 3 | 3A | 20938780 | 1.25 | 0.969 | 114665 | 134706 | 0 | Atlas Technical Consultants |
General comments (publicly viewable) (Max 1000 characters): Atlas Technical Consultants
Test was verified on 2/6/2025 ✔