Summary for Test 2024-10-07-70-5
Test performed: AASHTO T313-22Project Information
| Project Identifiers | Project ID: 995055 DEA: 024H0504 EFIS: 0218000080 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-273,299-18.5/18.7,24.1/30.3 |
| Award Date | 11/16/2023 |
| Closeout Date | Not set |
| Work Description | PLACE RHMA, HMA, MINOR CONCRETE, AND REPLACE AC SURFACING. |
| Location Description | SHASTA COUNTY IN AND NEAR REDDING ON ROUTE 273 FROM 0.5 MILE NORTH OF SULPHUR CREEK BRIDGE TO 0.2 MILE SOUTH OF TWIN VIEW BOULEVARD AND ON ROUTE 299 FROM 0.2 MILE WEST OF HILLTOP DRIVE TO 0.1 MILE EAST OF HOOTENANNY LANE |
| QA Service Level | 1 (Verified on 10/09/2023) |
Sample Information
| Sample Taken Date | 10/07/2024 | Sample Unique Key | 70 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/22/2024 |
| Sample type | Production Start-Up | A brief description of the sample | BINDER |
| The quantity of what the sample constitutes | 2 CAN | From where was the sample collected | Source |
| First name of sampler or witnessed by | C | Last name of sampler or witnessed by | B |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Valero - Benicia, CA | Transportation Laboratory (TL) Number | 858520 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Asphalt Binder | Performance Grade | PG 58-22 |
|---|---|---|---|
| Modified | No | Lot number | 1 |
| Sublot number | 1 | Tank number | |
| Time of sample | HMA Supplier | Tullis North state Asphalt | |
| Certified Asphalt Supplier | Valero Marketing & Supply - Benicia CA | Multigrade | No |
| Multigrade Type | Asphalt Binder Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-07-70
DIME Test ID: 2024-10-07-70-5
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2025-01-16
Test Results
Input Type: Calculated
Tester's full name: Alexis Vargas-Bastida
Date of test: 12/20/2024
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 214.000 MPa
Estimated Stiffness Modulus 60.0 s: no data
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.343
General comments (publicly viewable) (Max 1000 characters): BBR
Test was verified on 1/16/2025 ✔