Summary for Test 2024-12-09-46-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 1000286 DEA: 070W7004 EFIS: 0723000032 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-405-44.7/48.64 |
| Award Date | 06/19/2024 |
| Closeout Date | 12/24/2025 |
| Work Description | INDIVIDUAL SLAB REPLACEMENT (RSC), & GRIND EXIST CONC PAVEMENT. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES FROM NORDHOFF STREET UNDERCROSSING TO ROUTE 5/405 SEPARATION |
| QA Service Level | 1 (Verified on 09/16/2024) |
Sample Information
| Sample Taken Date | 12/09/2024 | Sample Unique Key | 46 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/10/2024 | Sample type | Acceptance |
| A brief description of the sample | Coarse and fine aggregate | The quantity of what the sample constitutes | Two Bags |
| From where was the sample collected | Other | First name of sampler or witnessed by | Baher |
| Last name of sampler or witnessed by | Fakhoury | Title of sampler | |
| Telephone number of sampler | 2137937180 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Stockpile at the contractors yard | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile @ Yard | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
| The concrete mix design number | CTS-65-EHI | Lot number | |
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-12-09-46
DIME Test ID: 2024-12-09-46-1
Testing Lab: CT D07 - Plant Services, Unit 1841
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2025-02-07
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Baher Fakhoury
Date of test: 12/11/2024
| Sieve Size | Cumulative Mass Retained | Cumulative Percent Passing | ||||
|---|---|---|---|---|---|---|
| 10180 grams | ||||||
| 262.0 grams | 97 % | |||||
| 1962.0 grams | 81 % | |||||
| 6746.0 grams | 34 % | |||||
| 8722.0 grams | 14 % | |||||
| 9775.0 grams | 4 % | |||||
| 9960.0 grams | 2 % | |||||
| 10180.0 grams | 0 % | |||||
| 10180.0 grams | ||||||
General comments (publicly viewable) (Max 1000 characters): The Coarse gradation aggregate is out of operating range and contract compliance on sieve #'s 1'' & 3/4''
Test was verified on 2/7/2025 ✔