Summary for Test 2024-11-14-48-1
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 1000283 DEA: 040Y7904 EFIS: 0422000340 |
|---|---|
| DIST-CO-RTE-PM | 04-SOL-12,37,80,113,505,780-Var |
| Award Date | 06/19/2024 |
| Closeout Date | 09/05/2025 |
| Work Description | PLACE POLYESTER CONCRETE OVERLAY, & REPLACE JOINT SEAL. |
| Location Description | SOLANO COUNTY AT VARIOUS LOCATIONS |
| QA Service Level | 1 (Verified on 06/03/2024) |
Sample Information
| Sample Taken Date | 11/14/2024 | Sample Unique Key | 48 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/15/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000145KBP | Linked DIME Sample ID | 000145KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4K01804 |
|---|---|---|---|
| Batch number | AZ4K01804 | Mix number | AZ4K01804 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-11-14-48
DIME Test ID: 2024-11-14-48-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-12-31
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 12/01/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.482 in
Sample 1 Thickness: 0.265 in
Sample 1 Area: 0.1277 in^2
Sample 1 Ultimate Strength Actual: 437.245 lbs
Sample 1 percent elongation: 56.08 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.482 in
Sample 2 Thickness: 0.267 in
Sample 2 Area: 0.1287 in^2
Sample 2 Ultimate Strength Actual: 441.441 lbs
Sample 2 percent elongation: 47.14 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.481 in
Sample 3 Thickness: 0.252 in
Sample 3 Area: 0.1212 in^2
Sample 3 Ultimate Strength Actual: 417.049 lbs
Sample 3 percent elongation: 49.57 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.481 in
Sample 4 Thickness: 0.261 in
Sample 4 Area: 0.1255 in^2
Sample 4 Ultimate Strength Actual: 426.323 lbs
Sample 4 percent elongation: 55.96 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.481 in
Sample 5 Thickness: 0.256 in
Sample 5 Area: 0.1231 in^2
Sample 5 Ultimate Strength Actual: 419.525 lbs
Sample 5 percent elongation: 55.83 %
Sample 5 Time: 0 MM:SS
Sample 1 Ultimate strength: 3424 psi
Sample 2 Ultimate strength : 3430 psi
Sample 3 Ultimate strength: 3441 psi
Sample 4 Ultimate strength: 3397 psi
Sample 5 Ultimate strength: 3408 psi
Ultimate Strength Average: 3420 psi
Percent Elongation Average: 53 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendor's Results
Test was verified on 12/31/2024 ✔