Summary for Test 2024-10-04-54-1
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 1000187 DEA: 112N1674 EFIS: 1122000280 |
|---|---|
| DIST-CO-RTE-PM | 11-IMP-86-R34.8/64.1 |
| Award Date | 06/04/2024 |
| Closeout Date | 06/09/2025 |
| Work Description | POLYESTER CONCRETE OVERLAY, APPLY METHACRYLATE,& JOINT SEALS. |
| Location Description | IMPERIAL COUNTY AT VARIOUS LOCATIONS FROM TRIFOLIUM CANAL BRIDGE (58-0017) TO GODETIA DITCH BRIDGE (58-0067) |
| QA Service Level | 1 (Verified on 06/11/2024) |
Sample Information
| Sample Taken Date | 10/04/2024 | Sample Unique Key | 54 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/07/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000138KBP | Linked DIME Sample ID | 000138KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4I01519 |
|---|---|---|---|
| Batch Number | AZ4I01519 | Mix number | AZ4I01519 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-04-54
DIME Test ID: 2024-10-04-54-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-12-30
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 10/10/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.487 in
Sample 1 Thickness: 0.257 in
Sample 1 Area: 0.1252 in^2
Sample 1 Ultimate Strength Actual: 419.044 lbs
Sample 1 percent elongation: 44.5 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.486 in
Sample 2 Thickness: 0.257 in
Sample 2 Area: 0.1249 in^2
Sample 2 Ultimate Strength Actual: 433.528 lbs
Sample 2 percent elongation: 59.6 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.487 in
Sample 3 Thickness: 0.254 in
Sample 3 Area: 0.1237 in^2
Sample 3 Ultimate Strength Actual: 416.127 lbs
Sample 3 percent elongation: 50.8 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.486 in
Sample 4 Thickness: 0.256 in
Sample 4 Area: 0.1244 in^2
Sample 4 Ultimate Strength Actual: 428.558 lbs
Sample 4 percent elongation: 58 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.487 in
Sample 5 Thickness: 0.252 in
Sample 5 Area: 0.1227 in^2
Sample 5 Ultimate Strength Actual: 432.64 lbs
Sample 5 percent elongation: 59.7 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.487 in
Sample 6 Thickness: 0.258 in
Sample 6 Area: 0.1256 in^2
Sample 6 Ultimate Strength Actual: 429.929 lbs
Sample 6 percent elongation: 53.8 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3347 psi
Sample 2 Ultimate strength : 3471 psi
Sample 3 Ultimate strength: 3364 psi
Sample 4 Ultimate strength: 3445 psi
Sample 5 Ultimate strength: 3526 psi
Sample 6 Ultimate strength : 3423 psi
Ultimate Strength Average: 3429 psi
Percent Elongation Average: 54 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendor's Results
Test was verified on 12/30/2024 ✔