Summary for Test 2024-10-15-2-13
Test performed: ASTM A370-20Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 10/15/2024 | Sample Unique Key | 2 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 12/02/2024 | Sample type | Quality Assurance |
| A brief description of the sample | Double Ended Stud Assembly | The quantity of what the sample constitutes | 202 |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Brian |
| Last name of sampler or witnessed by | Murray | Title of sampler | QA Inspector |
| Telephone number of sampler | 5624420352 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Halo Structural Products | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | L140-091-24 | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 79013997 8000022214 236822 | Nut Mfg. Lot Number(s) | W000093589 |
| Washer Mfg. Lot Number(s) | 236822 / 39673 | Bolt Specification | ASTM F1554 Gr. 55 |
| Bolt Length(s) | 42" | Nut Specification | ASTM A563 HD |
| Washer Specification | ASTM F436 | Finish | HDG |
| Diameter/Size | 1 1/4" | Bolt Mfg. Lot Number | 79013997 |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-15-2
DIME Test ID: 2024-10-15-2-13
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Reduced Tensile)
Test Release Date: 2024-12-23
Test Results
Number of Samples: 2
Input Type: Measured
Tester's full name: Steven Paine
Date of test: 12/23/2024
UTM: NA
Temperature: 0 f
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1A | 79013997 | 1.25 | 0.969 | 65944 | 89432 | 0000 | Atlas |
| 2 | 1B | 79013997 | 1.25 | 0.969 | 66357 | 89257 | 0000 | Atlas |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/23/2024 ✔