Summary for Test 2024-12-05-48-3
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 12/05/2024 | Sample Unique Key | 48 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/06/2024 |
| Sample type | Verification | A brief description of the sample | JMF-PP |
| The quantity of what the sample constitutes | 24 BOXES RWMA | From where was the sample collected | Source |
| First name of sampler or witnessed by | Derrick | Last name of sampler or witnessed by | McCovy |
| Title of sampler | Telephone number of sampler | 6193722435 | |
| Laboratory sample identification | 1203-JMF | Linked DIME Sample ID | 2024-12-05-49 |
| The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Not Applicable |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | |
| Sublot number | HMA Mix Number | 326122 Otay SJR | |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-12-05-48
DIME Test ID: 2024-12-05-48-3
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2024-12-19
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 12/17/2024
Mass of the dry specimen in air: 4643.7 g
Mass of the dry specimen plus paraffin coating in air: 4696.7 g
Mass of the dry specimen plus paraffin coating in water: 2637.9 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4644.0 g
Mass 2 of the dry specimen plus paraffin coating in air: 4693.5 g
Mass 2 of the dry specimen plus paraffin coating in water: 2640.0 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4647.6 g
Mass 3 of the dry specimen plus paraffin coating in air: 4701.7 g
Mass 3 of the dry specimen plus paraffin coating in water: 2645.2 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.322
Bulk Specific Gravity 2: 2.324
Bulk Specific Gravity 3: 2.328
Average Bulk Specific Gravity: 2.325
General comments (publicly viewable) (Max 1000 characters): Complies Target 4.0 % Air Void Tested an Avg of 3 - 3.9% Air Void
Test was verified on 12/19/2024 ✔