Summary for Test 2024-11-15-1-1
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 215741 DEA: 01366004 EFIS: 0100000127 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-101-80.0/84.0 |
| Award Date | 12/29/2022 |
| Closeout Date | Not set |
| Work Description | Indianola Cutoff UC |
| Location Description | HUMBOLDT COUNTY NEAR EUREKA FROM EUREKA SLOUGH BRIDGE TO BAYSIDE CUTOFF |
| QA Service Level | 1 (Verified on 05/17/2021) |
Sample Information
| Sample Taken Date | 11/15/2024 | Sample Unique Key | 1 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 11/20/2024 | Sample type | Quality Assurance |
| A brief description of the sample | Flash Welded Rebar Hoops | The quantity of what the sample constitutes | 5 Lots of 150 Hoops |
| From where was the sample collected | Fabricator | First name of sampler or witnessed by | Peter |
| Last name of sampler or witnessed by | Harvey | Title of sampler | Assistant METS Representative |
| Telephone number of sampler | (707) 364-2452 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Conco Companies Benicia | |
| Transportation Laboratory (TL) Number | TL-29 TL-6034 | Inspector Lot Number from the Transportation Laboratory (TL) Form | S74-030-24 |
| Structure unique identifier | 04-0314 (Indianola Cutoff UC) | Structure name | Eureka Slough |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM5 - Welded Hoops | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Ultimate | Rebar Heat Number(s) | 4143609 |
| Hoop Manufacturer Lot Number(s) | H125 | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Size | #5 |
| Diameter of Hoop | 1'-6.5" | Epoxy Coated | No |
| Epoxy Coating Color | NA | Rebar Manufacturer | CMC Steel Arizona |
| Welding Company | Conco Companies Benicia | Coating Standards | Uncoated |
| Weld Type | Flash Welded |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-11-15-1
DIME Test ID: 2024-11-15-1-1
Testing Lab: Kleinfelder, Incorporated - Sacramento
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile)
Test Release Date: 2024-11-22
Test Results
Number of Samples: 4
Input Type: Calculated
Tester's full name: Michael Kalwasinski
Date of test: 11/22/2024
UTM: NA
Temperature: 72 f
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | H125 | 5 | 0.31 | 29690 | 96000 | na | MK |
| 2 | 2 | H125 | 5 | 0.31 | 30390 | 98000 | na | MK |
| 3 | 3 | H125 | 5 | 0.31 | 29610 | 95500 | na | MK |
| 4 | 4 | H125 | 5 | 0.31 | 32940 | 106000 | na | MK |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/22/2024 ✔