Summary for Test 2024-10-03-46-1
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 1000166 DEA: 101P7204 EFIS: 1022000156 |
|---|---|
| DIST-CO-RTE-PM | 10-SJ-5-R19.6/R24.0 |
| Award Date | 05/10/2024 |
| Closeout Date | 09/24/2025 |
| Work Description | POLYESTER CONCRETE OVERLAY, STRUCTURAL CONCRETE, COLD PLANE AND HMA. |
| Location Description | SAN JOAQUIN COUNTY IN AND NEAR STOCKTON AT VARIOUS LOCATIONS FROM ROTH ROAD UNDERCROSSING TO WALKER SLOUGH BRIDGE |
| QA Service Level | 1 (Verified on 03/11/2024) |
Sample Information
| Sample Taken Date | 10/03/2024 | Sample Unique Key | 46 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/04/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 34 Totes | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000136KBP | Linked DIME Sample ID | 000136KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4I01516T |
|---|---|---|---|
| Batch number | AZ4I01516T | Mix number | AZ4I01516T |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-03-46
DIME Test ID: 2024-10-03-46-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-12-30
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 10/10/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.485 in
Sample 1 Thickness: 0.267 in
Sample 1 Area: 0.1295 in^2
Sample 1 Ultimate Strength Actual: 360.917 lbs
Sample 1 percent elongation: 61.7 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.484 in
Sample 2 Thickness: 0.254 in
Sample 2 Area: 0.1229 in^2
Sample 2 Ultimate Strength Actual: 351.125 lbs
Sample 2 percent elongation: 60.5 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.484 in
Sample 3 Thickness: 0.264 in
Sample 3 Area: 0.1278 in^2
Sample 3 Ultimate Strength Actual: 382.505 lbs
Sample 3 percent elongation: 69 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.484 in
Sample 4 Thickness: 0.26 in
Sample 4 Area: 0.1258 in^2
Sample 4 Ultimate Strength Actual: 393.754 lbs
Sample 4 percent elongation: 73.3 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.484 in
Sample 5 Thickness: 0.256 in
Sample 5 Area: 0.1239 in^2
Sample 5 Ultimate Strength Actual: 378.514 lbs
Sample 5 percent elongation: 70.9 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.484 in
Sample 6 Thickness: 0.264 in
Sample 6 Area: 0.1278 in^2
Sample 6 Ultimate Strength Actual: 375.732 lbs
Sample 6 percent elongation: 2940 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 2787 psi
Sample 2 Ultimate strength : 2857 psi
Sample 3 Ultimate strength: 2993 psi
Sample 4 Ultimate strength: 3130 psi
Sample 5 Ultimate strength: 3055 psi
Sample 6 Ultimate strength : 2940 psi
Ultimate Strength Average: 2960 psi
Percent Elongation Average: 546 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendor's Results
Test was verified on 12/30/2024 ✔