Summary for Test 2024-10-07-62-1
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 1000187 DEA: 112N1674 EFIS: 1122000280 |
|---|---|
| DIST-CO-RTE-PM | 11-IMP-86-R34.8/64.1 |
| Award Date | 06/04/2024 |
| Closeout Date | 06/09/2025 |
| Work Description | POLYESTER CONCRETE OVERLAY, APPLY METHACRYLATE,& JOINT SEALS. |
| Location Description | IMPERIAL COUNTY AT VARIOUS LOCATIONS FROM TRIFOLIUM CANAL BRIDGE (58-0017) TO GODETIA DITCH BRIDGE (58-0067) |
| QA Service Level | 1 (Verified on 06/11/2024) |
Sample Information
| Sample Taken Date | 10/07/2024 | Sample Unique Key | 62 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/09/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 34 Totes | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000139KBP | Linked DIME Sample ID | 000139KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4I01518T |
|---|---|---|---|
| Batch Number | AZ4I01518T | Mix number | AZ4I01518T |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-07-62
DIME Test ID: 2024-10-07-62-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-12-30
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 10/14/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.485 in
Sample 1 Thickness: 0.247 in
Sample 1 Area: 0.1198 in^2
Sample 1 Ultimate Strength Actual: 321.304 lbs
Sample 1 percent elongation: 60.5 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.483 in
Sample 2 Thickness: 0.246 in
Sample 2 Area: 0.1188 in^2
Sample 2 Ultimate Strength Actual: 378.734 lbs
Sample 2 percent elongation: 77.2 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.484 in
Sample 3 Thickness: 0.244 in
Sample 3 Area: 0.1181 in^2
Sample 3 Ultimate Strength Actual: 385.006 lbs
Sample 3 percent elongation: 78.7 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.484 in
Sample 4 Thickness: 0.247 in
Sample 4 Area: 0.1195 in^2
Sample 4 Ultimate Strength Actual: 390.526 lbs
Sample 4 percent elongation: 78.8 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.484 in
Sample 5 Thickness: 0.243 in
Sample 5 Area: 0.1176 in^2
Sample 5 Ultimate Strength Actual: 337.512 lbs
Sample 5 percent elongation: 66.3 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.484 in
Sample 6 Thickness: 0.251 in
Sample 6 Area: 0.1215 in^2
Sample 6 Ultimate Strength Actual: 361.098 lbs
Sample 6 percent elongation: 71 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 2682 psi
Sample 2 Ultimate strength : 3188 psi
Sample 3 Ultimate strength: 3260 psi
Sample 4 Ultimate strength: 3268 psi
Sample 5 Ultimate strength: 2870 psi
Sample 6 Ultimate strength : 2972 psi
Ultimate Strength Average: 3040 psi
Percent Elongation Average: 72 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendor's Results
Test was verified on 12/30/2024 ✔