Summary for Test 2024-10-03-110-5
Test performed: ASTM C39-21Project Information
| Project Identifiers | Project ID: 995176 DEA: 051H3104 EFIS: 0516000060 |
|---|---|
| DIST-CO-RTE-PM | 05-SB-154-R5.7/R6.2 |
| Award Date | 01/29/2024 |
| Closeout Date | 09/16/2025 |
| Work Description | CONSTRUCT ROUNDABOUT, CURB RAMPS, RUMBLE STRIP AND LIGHTING SYSTEM. |
| Location Description | SANTA BARBARA COUNTY NEAR SANTA YNEZ FROM 0.3 MILE EAST OF EDISON STREET/BASELINE AVENUE TO 0.2 MILE WEST OF EDISON STREET/BASELINE AVENUE |
| QA Service Level | 1 (Verified on 10/02/2023) |
Sample Information
| Sample Taken Date | 10/03/2024 | Sample Unique Key | 110 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 10/03/2024 | Sample type | Quality Control |
| A brief description of the sample | Mix 23-SE-10125 | The quantity of what the sample constitutes | 9 concrete cylinders |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Maximus |
| Last name of sampler or witnessed by | Guillen | Title of sampler | QCM |
| Telephone number of sampler | 8052975145 | Laboratory sample identification | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Pre-Con Products | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 23-SE-10125 |
|---|---|---|---|
| The truck number from where the sample was collected | The batch plant ticket number from where the sample was collected | 302288 | |
| Concrete batch plant | Builders Ready Mix | The fabricator/manufacturer designation for the sample | |
| A detailed description of where the material sample was collected | Sampled for Delivery Truck | Where the material sample would have been placed if not sampled | |
| From Lot No. | Bag Lot No. |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-10-03-110
DIME Test ID: 2024-10-03-110-5
Testing Lab: Precon Products - Simi Valley
Test Method: ASTM C39-21: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2024-11-13
Test Results
Unit system used?: US Units
Number of specimens: 3
Test performed: With no density determined
Input Type: Calculated
Tester's full name: Brandon Garcia
Date of test: 10/31/2024
Capped in accordance with?: ASTM C617 - Sulfur Mortar Cap
Apparent mass of submerged cylinder 1: 9 lb
Average diameter of cylinder 1: 4.00 in
Average diameter of cylinder 2: 4.00 in
Average diameter of cylinder 3: 4.00 in
Maximum load on cylinder 1: 71710 lb
Maximum load on cylinder 2: 69860 lb
Maximum load on cylinder 3: 71450 lb
Type of fracture pattern of cylinder 1: 4
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: 1.00
Correction factor for cylinder 3: 1.00
Age of specimen: 28 days
Age of specimen in hours: 0 hours
Cross sectional area of cylinder 1: 12.56 in^2
Cross sectional area of cylinder 2: 12.56 in^2
Cross sectional area of cylinder 3: 12.56 in^2
Compressive strength (to nearest 10 psi): 5650 psi
Serial number of delivery ticket, if available: no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/13/2024 ✔