Summary for Test 2024-09-22-15-1
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 213457 DEA: 11430434 EFIS: 1118000197 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-8-12.9/14.6,14.9 |
| Award Date | 07/16/2022 |
| Closeout Date | 08/21/2025 |
| Work Description | HMA, STRUCTURAL BRIDGE, POLYESTER CONC OVERLAY, JPCP, & CONC BARRIER. |
| Location Description | SAN DIEGO COUNTY IN LA MESA AND EL CAJON FROM 0.1 MILE WEST OF GROSSMONT BOULEVARD OVERCROSSING TO WEST MAIN STREET OVERCROSSING AND AT MARSHALL AVENUE OVERHEAD |
| QA Service Level | 1 (Verified on 06/22/2018) |
Sample Information
| Sample Taken Date | 09/22/2024 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2024 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can / PPC 1121 RESIN |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Gilberto | Last name of sampler or witnessed by | Gonzalez |
| Title of sampler | Quality Control Manager | Telephone number of sampler | 7076245467 |
| Laboratory sample identification | 000128KBP | Linked DIME Sample ID | 000128KBP |
| The fabricator/manufacturer/facility name | Kwik Bond Polymers, Benicia | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | AZ4I01431 |
|---|---|---|---|
| Batch Number | AZ4I01431 | Mix number | AZ4I01431 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-09-22-15
DIME Test ID: 2024-09-22-15-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2024-12-30
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Linda Bergstrom
Date of test: 09/26/2024
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.485 in
Sample 1 Thickness: 0.258 in
Sample 1 Area: 0.1251 in^2
Sample 1 Ultimate Strength Actual: 378.677 lbs
Sample 1 percent elongation: 75 %
Sample 1 Time: 0 MM:SS
Sample 2 Width: 0.486 in
Sample 2 Thickness: 0.264 in
Sample 2 Area: 0.1283 in^2
Sample 2 Ultimate Strength Actual: 381.693 lbs
Sample 2 percent elongation: 74.6 %
Sample 2 Time: 0 MM:SS
Sample 3 Width: 0.503 in
Sample 3 Thickness: 0.255 in
Sample 3 Area: 0.1283 in^2
Sample 3 Ultimate Strength Actual: 376.176 lbs
Sample 3 percent elongation: 74.7 %
Sample 3 Time: 0 MM:SS
Sample 4 Width: 0.485 in
Sample 4 Thickness: 0.269 in
Sample 4 Area: 0.1305 in^2
Sample 4 Ultimate Strength Actual: 372.969 lbs
Sample 4 percent elongation: 69.7 %
Sample 4 Time: 0 MM:SS
Sample 5 Width: 0.485 in
Sample 5 Thickness: 0.264 in
Sample 5 Area: 0.128 in^2
Sample 5 Ultimate Strength Actual: 362.88 lbs
Sample 5 percent elongation: 68.8 %
Sample 5 Time: 0 MM:SS
Sample 6 Width: 0.487 in
Sample 6 Thickness: 0.261 in
Sample 6 Area: 0.1271 in^2
Sample 6 Ultimate Strength Actual: 368.59 lbs
Sample 6 percent elongation: 70.7 %
Sample 6 Time: 0 MM:SS
Sample 1 Ultimate strength: 3027 psi
Sample 2 Ultimate strength : 2975 psi
Sample 3 Ultimate strength: 2932 psi
Sample 4 Ultimate strength: 2858 psi
Sample 5 Ultimate strength: 2835 psi
Sample 6 Ultimate strength : 2900 psi
Ultimate Strength Average: 2921 psi
Percent Elongation Average: 72 %
General comments (publicly viewable) (Max 1000 characters): Accepted Vendor's Results
Test was verified on 12/30/2024 ✔