Summary for Test 2024-07-31-128-2

Test performed: AASHTO T275-07r12

Project Information

Project IdentifiersProject ID: 1000090
DEA: 024J9204
EFIS: 0223000087
DIST-CO-RTE-PM02-TRI-299-61.0/64.0,70.0/72.2
Award Date04/16/2024
Closeout Date11/27/2024
Work DescriptionASPHALT RUBBER CHIP SEAL WITH REPLACE ASPHALT CONCRETE SURFACING.
Location DescriptionTRINITY COUNTY NEAR DOUGLAS CITY FROM STEEL BRIDGE ROAD TO 1.5 MILES WEST OF GRASS VALLEY CREEK BRIDGE NO 05-0013 AND FROM 2.6 MILES EAST OF TRINITY DAM BOULEVARD TO THE SHASTA COUNTY LINE
QA Service Level1 (Verified on 03/18/2024)

Sample Information

Sample Taken Date07/31/2024 Sample Unique Key128
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/31/2024
Sample typeProduction Start-Up A brief description of the sample1/2 HMA Type A w/25% RAP PG58-22 Valero
The quantity of what the sample constitutesPSE 16 boxs From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79677 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis Inc. - Northstate Asphalt (Redding CA) Transportation Laboratory (TL) Number858504
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number
Binder content (%)Not set Virgin binder PGNot set
Design binder PGNot set Binder SupplierNot set
RAP content (%)Not set WMA AdditivesNot set
Antistrip typeNot set

Test Details

DIME Sample ID: 2024-07-31-128
DIME Test ID: 2024-07-31-128-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2024-10-22

Test Results


Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Josh Murphy
Date of test: 08/01/2024
Mass of the dry specimen in air: 4731.4 g
Mass of the dry specimen plus paraffin coating in air: 4783.2 g
Mass of the dry specimen plus paraffin coating in water: 2769.4 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4733.4 g
Mass 2 of the dry specimen plus paraffin coating in air: 4777.8 g
Mass 2 of the dry specimen plus paraffin coating in water: 2768.8 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4733.4 g
Mass 3 of the dry specimen plus paraffin coating in air: 4779.0 g
Mass 3 of the dry specimen plus paraffin coating in water: 2772.3 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.419
Bulk Specific Gravity 2: 2.415
Bulk Specific Gravity 3: 2.420
Average Bulk Specific Gravity: 2.418
General comments (publicly viewable) (Max 1000 characters): Gmb=2.418

Test was verified on 10/22/2024