Summary for Test 2024-07-24-78-5
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 1000088 DEA: 024J8104 EFIS: 0223000076 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-32-20.0/R24.8 |
| Award Date | 04/16/2024 |
| Closeout Date | 06/16/2025 |
| Work Description | PLACE HOT MIX ASPHALT (TYPE A) AND REPLACE ASPHALT CONCRETE SURFACING. |
| Location Description | TEHAMA COUNTY ABOUT 33 MILES EAST OF FOREST RANCH FROM 0.5 MILE WEST OF SLATE CREEK BRIDGE TO ROUTE 36 |
| QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
| Sample Taken Date | 07/24/2024 | Sample Unique Key | 78 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/25/2024 |
| Sample type | Production Start-Up | A brief description of the sample | 16 boxes of Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0 RAP and virgin PG 58-34 M from Valero – Benicia |
| The quantity of what the sample constitutes | Production Start Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Joe | Last name of sampler or witnessed by | Mishoe |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | D79659 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Dig It Construction – Sierra Cascade Aggregate and Asphalt Products (Chester, CA) | Transportation Laboratory (TL) Number | 875709 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/8 inch | Lot number | |
| Sublot number | HMA Mix Number | ||
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-07-24-78
DIME Test ID: 2024-07-24-78-5
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2024-09-30
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Sean Mcwithey
Date of test: 09/27/2024
Test procedure used?: Method A
Mass of the specimen basket assembly: 3027.5 g
Mass of the specimen and specimen basket assembly prior to ignition: 4457.7 g
Mass of HMA Sample prior to ignition: 1430.2 g
Mass Loss: 91.0 g
Mass of aggregate remaining after ignition: 1339.2 g
Correction Factor (Percent by mass of HMA Specimen): 0.39 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.21 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.76 %
General comments (publicly viewable) (Max 1000 characters): Pb=5.76%
Test was verified on 9/30/2024 ✔