Summary for Test 2024-09-17-13-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 1000165 DEA: 09392504 EFIS: 0923000029 |
---|---|
DIST-CO-RTE-PM | 09-INY-395-R17.2/25.8 |
Award Date | 06/26/2024 |
Closeout Date | 12/02/2024 |
Work Description | HOT MIX ASPHALT (TYPE A), SHOULDER BACKING, & STRIPING. |
Location Description | INYO COUNTY ABOUT 9 MILES SOUTH OF OLANCHA FROM 0.8 MILE SOUTH OF SYKES ROAD TO 0.3 MILE NORTH OF HAIWEE CANYON ROAD |
QA Service Level | 1 (Verified on 03/18/2024) |
Sample Information
Sample Taken Date | 09/17/2024 | Sample Unique Key | 13 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/17/2024 |
Sample type | Acceptance | A brief description of the sample | 1/2” aggregate |
The quantity of what the sample constitutes | 1 bag of coldfeed | From where was the sample collected | Source |
First name of sampler or witnessed by | Dylan | Last name of sampler or witnessed by | Carapazza |
Title of sampler | Consultant QA | Telephone number of sampler | |
Laboratory sample identification | CF25 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite Solari Plant | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Granite solari |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1/2” coldfeed | The fabricator/manufacturer designation for the sample | |
The plant number | A detailed description of where the material sample was collected | Belt device at plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
2024-09-34: HMA Aggregates (Size 1/2"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP | 1 | 2024-09-17-13-2 |
Test Details
DIME Sample ID: 2024-09-17-13
DIME Test ID: 2024-09-17-13-2
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-09-18
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Calculated
Tester's full name: Derek Carrington
Date of test: 09/18/2024
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 94.2 %
Cumulative percent passing the 3/8 in. sieve: 77 %
Cumulative percent passing the #4 sieve: 49 %
Cumulative percent passing the #8 sieve: 39.3 %
Cumulative percent passing the #16 sieve: 29.5 %
Cumulative percent passing the #30 sieve: 19.6 %
Cumulative percent passing the #50 sieve: 10.3 %
Cumulative percent passing the #100 sieve: 4.4 %
Cumulative percent passing the #200 sieve: 2.9 %
General comments (publicly viewable) (Max 1000 characters): CF-25 Agg
Test was verified on 9/18/2024 ✔